20 or more:
104,83 EUR
50 or more:
103,92 EUR
200 or more:
103,01 EUR
500 or more:
102,10 EUR
1000 or more:
101,19 EUR
2500 or more:
100,27 EUR
HEAE5430567 - Z-TRM6 Thermostat Z-Wave 800 series (White RAL 9010)
Deliverytime: 3 - 5 working days (Mo-Fr) *
available: < 10
Key points at a glance:
Product Description
Heatit Z-TRM6is an electronic thermostat for electric heaters. The thermostat can be controlled via your Z-Wave network or via the buttons on the front of the thermostat. The thermostat has a user-friendly interface.
The Heatit Z-TRM6 has 3 modes: Heating - Cooling and Eco.
This thermostat fits into standard European junction boxes and can be used with most System 55 frames. It has a sturdy metal frame for secure attachment to the junction box. The thermostat has an inbuilt room temperature sensor. Two additional external temperature sensors can also be connected.
The Heatit Z-TRM6 has an active power measurement that allows the user to see the power consumption in real time. If a contactor is connected, the power measurement value can also be set manually.
This product features ZeroX technology. This technology ensures that the relay switches to 0 V when switching on and off. With this technology, the thermostat has a much longer service life.
The thermostat can be set up with multiple assignments and used as a master thermostat. It can control up to 10 thermostats and 10 external relays, e.g. sockets.
Features:
- Internal room sensor
- External room sensor (with cable)
- Floor sensor
- Power controller
- Temperature limiter 3 modes: Heating - Cooling and Eco
- Hysteresis/PWM temperature calibration
- Open window detection
- ZeroX detection
- Relay status icon
- Adjustable display brightness
- Single-pole switch
- Lock mode/child lock
- Active power measurement
- SmartStart
- Supports encryption modes S0, S2 Authenticated Class, S2 Unauthenticated Class
- IOT protocol: Z-Wave - 868.4 MHz (EU)
- Voltage: 230 VAC 50Hz
- Maximum load (watts - resistive load): 3600
- Intrinsic power consumption (watts): 2
- Effect controller:Timed cycle 0-30 minutes
- Hysteresis:0.3 to 3.0 (default hysteresis 0.5)
- Switch type: Single pole switch
- Compatible NTC sensors (Ω @ 25°C):10, 12, 15, 22, 33, 47, 6.8, 100
- Degree of protection (IP): IP21
- Ambient humidity (RH non-condensing %): 10-85
- Ambient temperature range in storage (°C): -30-70
- Operating range: 40m
- IOT chip type:Z-Wave 800 chip
Further data:
- Item dimensions (WxHxL): 75 x 75 x 50 mm
- Packaging dimensions (WxHxL): 90 x 90 x 70 mm
- Item weight (net): 0.168 Kg
- Item weight (gross): 0.213 Kg
- Z-Wave Plus
- Z-Wave S2
- WEEE
- CE
- IP class: IP21
The Heatit Z-TRM6 has 3 modes: Heating - Cooling and Eco.
This thermostat fits into standard European junction boxes and can be used with most System 55 frames. It has a sturdy metal frame for secure attachment to the junction box. The thermostat has an inbuilt room temperature sensor. Two additional external temperature sensors can also be connected.
The Heatit Z-TRM6 has an active power measurement that allows the user to see the power consumption in real time. If a contactor is connected, the power measurement value can also be set manually.
This product features ZeroX technology. This technology ensures that the relay switches to 0 V when switching on and off. With this technology, the thermostat has a much longer service life.
The thermostat can be set up with multiple assignments and used as a master thermostat. It can control up to 10 thermostats and 10 external relays, e.g. sockets.
Features:
- Internal room sensor
- External room sensor (with cable)
- Floor sensor
- Power controller
- Temperature limiter 3 modes: Heating - Cooling and Eco
- Hysteresis/PWM temperature calibration
- Open window detection
- ZeroX detection
- Relay status icon
- Adjustable display brightness
- Single-pole switch
- Lock mode/child lock
- Active power measurement
- SmartStart
- Supports encryption modes S0, S2 Authenticated Class, S2 Unauthenticated Class
- IOT protocol: Z-Wave - 868.4 MHz (EU)
- Voltage: 230 VAC 50Hz
- Maximum load (watts - resistive load): 3600
- Intrinsic power consumption (watts): 2
- Effect controller:Timed cycle 0-30 minutes
- Hysteresis:0.3 to 3.0 (default hysteresis 0.5)
- Switch type: Single pole switch
- Compatible NTC sensors (Ω @ 25°C):10, 12, 15, 22, 33, 47, 6.8, 100
- Degree of protection (IP): IP21
- Ambient humidity (RH non-condensing %): 10-85
- Ambient temperature range in storage (°C): -30-70
- Operating range: 40m
- IOT chip type:Z-Wave 800 chip
Further data:
- Item dimensions (WxHxL): 75 x 75 x 50 mm
- Packaging dimensions (WxHxL): 90 x 90 x 70 mm
- Item weight (net): 0.168 Kg
- Item weight (gross): 0.213 Kg
- Z-Wave Plus
- Z-Wave S2
- WEEE
- CE
- IP class: IP21
