TRB141 - INDUSTRIAL, ROBUST GPIO LTE GATEWAY

TRB141 is a small industrial LTE Cat 1 gateway equipped with various inputs/outputs and a micro USB port. This gateway features a secure, highly customisable RutOS and is perfect for remote management of devices and applications via I/O.

MOBILE
- Mobile module
4G LTE Cat 1 up to 10 DL/5 UL Mbps; 3G up to 384 DL/384 UL kbps; 2G up to 296 DL/236.8 UL kbps
- 3GPP Release Release 12
- Status
IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID,ARFCN, UARFCN, EARFCN, MCC, and MNC
- SMS
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
- USSD Supports sending and reading Unstructured Supplementary Service Data messages
- Black/White list Operator black/white list (by country or separate operators)
- Multiple PDN Possibility to use different PDNs for multiple network access and services
- Band management Band lock, Used band status display
- SIM PIN code management
SIM PIN code management enables setting, changing, or disabling the SIM card's PIN
- APN Auto APN
- Bridge Direct connection (bridge) between mobile ISP and device on LAN
- Passthrough Gateway assigns its mobile WAN IP address to another device on LAN

NETWORK
- Routing Static routing
- Network protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT
- VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
- Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
- Firewall Port forward, traffic rules, custom rules, TTL target customisation
- Firewall status page View all your Firewall statistics, rules, and rule counters
- Ports management View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
- Network topology Visual representation of your network, showing which devices are connected to which other devices
- DHCP Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
- QoS / Smart Queue Management (SQM) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
- DDNS Supported >25 service providers, others can be configured manually
- DNS over HTTPS DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
- Network backup Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
- SSHFS Possibility to mount remote file system via SSH protocol
- Traffic Management Real-time monitoring, wireless signal charts, traffic usage history

SECURITY
- Authentication
Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
- Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
- Attack prevention
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
- VLAN Port and tag-based VLAN separation
- Mobile quota control Mobile data limit, customisable period, start time, warning limit, phone number
- WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
- Access control Flexible access control of SSH, Web interface, CLI and Telnet
- SSL certificate generation Let's encrypt support

VPN
- OpenVPN Multiple clients and a server can run simultaneously, 27 encryption methods
- OpenVPN Encryption
DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
- IPsec
XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
- GRE GRE tunnel, GRE tunnel over IPsec support
- PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
- Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program's code
- DMVPN Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support
- SSTP SSTP client instance support
- ZeroTier ZeroTier VPN client support
- WireGuard WireGuard VPN client and server support
- Tinc Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.

OPC UA
- Supported modes Client, Server
- Supported connection types TCP

MODBUS
- Supported modes Server, Client
- Supported connection types TCP
- Custom registers
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
- Supported data formats 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

DATATO SERVER
- Protocol HTTP(S), MQTT, Azure MQTT, Kinesis
- Data to server
Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature

MQTTGATEWAY
- Modbus MQTT Gateway Allows sending commands and receiving data from MODBUS Server through MQTT broker

DNP3
- Supported modes Station, Outstation
- Supported connection TCP

DLMS
- DLMS Support DLMS - standard protocol for utility meter data exchange
- Supported modes Client
- Supported connection types TCP

API
- Teltonika Networks Web API (beta) support
Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com

MONITORING & MANAGEMENT
- WEB UI
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
- FOTA Firmware update from server, automatic notification
- SSH SSH (v1, v2)
- SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
- Call Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer
- TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
- MQTT MQTT Broker, MQTT publisher
- SNMP SNMP (v1, v2, v3), SNMP Trap, Brute force protection
- JSON-RPC Management API over HTTP/HTTPS
- RMS Teltonika Remote Management System (RMS)

IOTPLATFORMS
- ThingWorx Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
- Cumulocity - Cloud of Things
Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Has reboot and firmware upgrade actions
- Azure IoT Hub
Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs

SYSTEM CHARACTERISTICS
- CPU ARM Cortex-A7 1.2 GHz
- RAM 128 MB, DDR2
- FLASH storage 512 MB, SPI Flash

FIRMWARE/ CONFIGURATION
- WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup
- FOTA Update FW
- RMS Update FW/configuration for multiple devices at once
- Keep settings Update FW without losing current configuration
- Factory settings reset A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration

FIRMWARECUSTOMISATION
- Operating system RutOS (OpenWrt based Linux OS)
- Supported languages Busybox shell, Lua, C, C++, and Python in Package manager
- Development tools SDK package with build environment provided
- GPL customization
You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients' needs
- Package Manager The Package Manager is a service used to install additional software on the device

INPUT / OUTPUT
- Input
2 x Digital inputs (configurable passive or active), 1 x Isolated input, 1 x Analogue input ( with 4-20 mA capability). 1 x Configurable Inputs. Digital input 0 - 5 V detected as logic low, 8 - 30 V detected as logic high.
- Output 2 x Relay outputs (latching and non latching). 1 x Configurable Output, Open collector output, max output 30 V, 300 mA
- Events Email, RMS, SMS
- I/O juggler Allows to set certain I/O conditions to initiate event

POWER
- Connector 4-pin industrial DC power socket
- Input voltage range 9 - 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
- Power consumption < 5 W

PHYSICAL INTERFACES
- I/O's 3 x Digital Inputs, 1 x Analogue input, 2 x Relays on 16 pin connector, 2 x I/O pins on 4 pin power connector
- Status LEDs 3 x connection type status LEDs, 5 x connection strength LEDs, 1 x Power LED
- SIM 1 x SIM slot (Mini SIM - 2FF), 1.8 V/3 V
- Power 1 x 4-pin power connector
- 1-Wire 1 x 1-Wire interface on 16 pin connector
- Antennas 1 x SMA for LTE
- USB 1 x Virtual network interface via micro USB
- Reset Reboot/User default reset/Factory reset button

PHYSICAL SPECIFICATION
- Casing material Aluminium housing
- Dimensions (W x H x D) 74.5 x 25 x 64.4 mm
- Weight 136 g
- Mounting options DIN rail, wall mount, flat surface (all require additional kit)

OPERATING ENVIRONMENT
- Operating temperature -40 °C to 75 °C
- Operating humidity 10% to 90% non-condensing
- Ingress Protection Rating IP30

REGULATORY & TYPE APPROVALS
- Regulatory CE, UKCA, EAC, UCRF, ANRT, Kenya, ICASA, Anatel, NOM, RCM, Giteki
- Operator Deutsche Telekom AG

EMC EMISSIONS & IMMUNITY
- Standards
Draft EN 301 489-1 V2.2.0
Draft EN 301 489-52 V1.1.0
- ESD EN 61000-4-2:2009
- Radiated Immunity EN IEC 61000-4-3:2006 + A1:2008 + A2:2010
- EFT EN 61000-4-4:2012
- Surge Immunity (AC Mains Power Port) EN 61000-4-5:2014
- CS EN 61000-4-6:2014
- DIP EN 61000-4-11:2004

RF
- Standards
EN 301 511 V12.5.1
EN 301 908-1 V13.1.1
EN 301 908-2 V13.1.1
EN 301 908-13 V13.1.1

SAFETY
- Standards
CE: EN 62368-1:2014 + A11:2017, EN IEC 62232:2017, EN 50385:2017
RCM: AS/NZS 62368.1:2018
CB: IEC 62368-1:2018