BPI-P2 PRO (WITHOUT POE MODULE) - - Banana Pi -P2 PRO (without POE module)

Introduction

Banana Pi BPI-P2 pro（Armsom Pro） is a development board based on the RK3308B-S chip. With a powerful 4-core ARM Cortex-A35 processor, 512M RAM(16bit DDR2/DDR3/DDR3L/LPDDR2). and 8G eMMC onboard, supports PoE function.The chip has a wealth of interfaces, such as I2S,PCM,TDM, I2C,UART,SPDIF,HDMI ARC, etc., to meet the application of various products. The RK3308 has a comprehensive voice interface, a dedicated eight ADC interface, a multi-channel I2S interface and a multi-channel PDM interface. This not only provides customers with a wealth of interface options, but also can reduce the difficulty of hardware design and the cost of hardware design of products.

Banana Pi BPI-P2 Pro has 512MB DDR3 memory, operating system and memory can use SD card or emmc. BPI-P2 Pro is available as onboard memory version with 1Gb/2Gb/4Gb/8Gb NAND flash.

Application area
- Maker DIY
- IoT Intelligent Internet of Things
- Intelligent Voice Recognition
- Human Machine Interface
- Industrial Control
- Intelligent Robot

Key features
- CPU: 64-bit quad-core Arm Cortex-A35 Rockchip RK3308B-S
- 512 DDR3 SDRAM
- 8G eMMC flash on board
- WiFi&BT: 802.11 a/b/g/n/ac & BT5.0 (AP6256)
- 40 PIN GPIO, including UART, SPI, I2C, IO etc.
- 100M LAN
- Support IEEE 802.3af PoE standard for PoE modules
- Audio: Supports numerous audio interfaces, such as MIC/PDM/SPDIF/I2S

Hardware specifications
- SOC: RockChip RK3308B-S
- CPU: Quad-Core ARM Cortex-A35
- GPU: none
- ROM: 512MB
- RAM: 8GB eMMC
- TF card: TF card (Max 64GB)
- Network: 100M LAN
- PoE power: PoE function supported, output voltage 5V, output power 10W
- WiF:i AP6256
- Audio output: With built-in audio CODEC, including ADC×8 and DAC×2
- Power source: TYPE C 5V/2A or PoE power
- USB 1xUSB 2.0; - 1xType-C
- Others: Fan、RTC、LED、debug
- Power button、Reset button、Recovery button、Root button
- Low-level peripheral 40 pin + 12 pin
- uart: GPIO\(1x3\) pin UART, ground
- LED: Power led & Status led
- Product size: 65mm X 52.5mm
- Weight: 30g