ICF-1150I-S-ST-T - Industrial RS-232422485 to single-mode fibre optic converter, ST connector

Serial to fibre converter

Moxa's industrial-grade serial to fibre converters can convert RS-232/422/485 to fibre, providing users with an easy and reliable way to communicate with their serial devices.

Industrial RS-232/422/485 to single-mode fibre optic converter, ST connector, 2 kV insulation, -40 to 85°C operating temperature

Serial interface
- Number of ports: 2
- Serial standards:
RS-232
RS-422
RS-485
- Baud rate: 50 bps to 921.6 kbps (supports non-standardised baud rates)
- Flow Control: ADDC (automatic data direction control) for RS-485
- Connection: 5-pin terminal strip. Single-mode ST connection
- Insulation: 2 kV (I models)
- Pull high/low resistance for RS-485: 150 kilo-ohms, 10 kilo-ohms, 4.7 kilo-ohms, 3.3 kilo-ohms, 1 kilo-ohm, 909 ohms, 822 ohms, 770 ohms, 500 ohms, 485 ohms
- RS-485 data direction control: ADDC (automatic data direction control)
- Terminating resistor for RS-485: N/A, 120 ohms, 120 kilo-ohms

Serial signals
- RS-232: TxD, RxD, GND
- RS-422: Tx+, Tx-, Rx+, Rx-, GND
- RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2w: Data+, Data-, GND

Performance parameters
- Input current: 300 mA (max)
- Input voltage: 12 to 48 VDC
- Number of current inputs: 1
- Overload protection: Supported
- Power connection: Terminal block

Physical properties
- Housing: Metal
- IP protection class: IP30
- Dimensions: 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
- Weight: 330 g (0.73 lb)
- Installation: DIN rail mounting

Environmental conditions
- Operating temperature: -40 to 85°C (-40 to 185°F)
- Storage temperature (including packaging): -40 to 85°C (-40 to 185°F)
- Relative humidity: 5 to 95% (non-condensing)

Standards and certifications
- EMC: EN 55032/35
- EMI: CISPR 32, FCC Part 15B Class A
- EMS:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
- Environmental tests:
IEC 60068-2-1
IEC 60068-2-2
IEC 60068-2-3
- Safety: UL 61010-2-201
- Vibration: IEC 60068-2-6
- Hazardous areas: UL/cUL Class I Division 2 Groups A/B/C/D; ATEX Zone 2

MTBF
- Time: 792,085 hours
- Standards: Telcordia (Bellcore), GB