MGATE 5103 - 1-port ModbusEtherNetIP-to-PROFINET gateway, 0 to 60C operating temperature

PROFINET gateways

Our industrial PROFINET gateway solutions from MGate make it easy to connect fieldbus devices to a PROFINET network.

1-Port Modbus/EtherNet/IP to PROFINET gateway, 0 to 60°C operating temperature

Ethernet interface
- 10/100BaseT(X) ports (RJ45 connection): 2
- Auto MDI/MDI-X connection
- Magnetic isolation protection: 1.5 kV (built-in)

Ethernet software functions
- Industrial protocols
PROFINET IO device
Modbus TCP client (master)
Modbus TCP server (slave)
EtherNet/IP adapter
- Configuration options Configuration options
Web console (HTTP/HTTPS)
Device Search Utility (DSU)
Telnet console
- Management
ARP
DHCP client
DNS
HTTP
HTTPS
SMTP
SNMP Trap
SNMPv1/v2c/v3
TCP/IP
Telnet
SSH
UDP
NTP client
- MIB: RFC1213, RFC1317
-Time management: NTP client

Security functions
- Authentication: Local database
- Encryption
HTTPS
AES-128
AES-256
SHA-256
- Security protocols
SNMPv3
SNMPv2c Trap
HTTPS (TLS 1.3)

Serial interface
- Console connection: RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
- Number of connections: 1
- Connection: DB9 connector
- Serial standards: RS-232/422/485
- Baud rate: 50 bps to 921.6 kbps
- Data bits: 7, 8
- Parity
None
Even
Odd
Space
Mark
- Stop bits: 1, 2
- Flow Control
RTS Toggle (RS-232 only)
RTS/CTS
RS-485 Data Direction Control
Automatic Data Direction Control (ADDC)
Pull High/Low Resistor for RS-485
1 Kilo-Ohm, 150 Kilo-Ohm
Terminating resistor for RS-485
120 Ohm
Isolation
2 kV (built-in)

Serial signals
- RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422: Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2w: Data+, Data-, GND
- RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND

Serial software functions
- Configuration options: Serial console
- Industrial protocols
- Modbus RTU/ASCII Master
- Modbus RTU/ASCII Slave

Modbus RTU/ASCII
- Mode: Master, Slave
- Supported functions: 1, 2, 3, 4, 5, 6, 15, 16, 23
- Max. Number of commands: 128
- Input data size: 512 bytes
- Output data size: 512 bytes

Modbus TCP
- Mode: Client (master), Server (slave)
- Supported functions: 1, 2, 3, 4, 5, 6, 15, 16, 23
- Max. Max. number of client connections: 16
- Max. number of server connections; 32. Max. number of server connections: 32
- Max. number of commands: 128 Number of commands: 128
- Input data size: 512 bytes
- Output data size: 512 bytes

PROFINET
- Mode: IO Device
- Max. Number of IO controller connections: 1 (for read/write)
- Input data size: 512 bytes
- Output data size: 512 bytes

EtherNet/IP
- Mode: Adapter
- Supported CIP objects
Identity
Message Router
Assembly
Connection Manager
TCP/IP interface
Ethernet link
Port
- Max. Max. number of scanner ports: 1 (read only), 1 (read/write)
- Input data size: 496 bytes
- Output data size: 496 bytes

Memory
- microSD slot: Up to 32 GB (SD 2.0 compatible)

Power supply parameters
- Input voltage_ 12 to 48 VDC
- Input current: 455 mA @ 12 VDC
- Power supply connection: Screwable Euroblock terminal

Relay
- Rated contact current: Resistance load: 2 A @ 30 VDC

Physical properties
- Housing: Metal
- IP protection class: IP30
- Dimensions: 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)
- Weight: 507 g (1.12 lb)

Environmental conditions
- Operating temperature: 0 to 60°C (32 to 140°F)
- Storage temperature (including packaging): -40 to 85°C (-40 to 185°F)
- Relative humidity: 5 to 95% (non-condensing)

Standards and certifications
- EMC: EN 55032/35
- EMI: CISPR 32, FCC Part 15B Class B
- EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
IEC 61000-4-8 PFMF
- Safety:
EN 62368-1
UL 50- 8
Hazardous areas:
ATEX
Class I Division 2
IECEx
- Free fall: IEC 60068-2-32
Shock:
IEC 60068-2-27
Vibration:
IEC 60068-2-6
IEC 60068-2-64

MTBF
- Time: 859,422 hours
- Standards: Telcordia SR332