ICF-1150I-M-ST - Industrial RS-232422485 to multi-mode fibre converter, ST connector, 2 kV isolat

ICF-1150I-M-ST
ICF-1150 series
Industrial RS-232/422/485 to multimode fibre optic converter, ST connector, 2 kV insulation, 0 to 60 °C operating temperature

Serial interface
-Number of ports:2
-Serial standards:
RS-232
RS-422
RS-485

-Baud rate:50 bps to 921.6 kbps (supports non-standard baud rates)
-Data direction control:ADDC (automatic data direction control) for RS-485
-Connector: 5-pin terminal block, multimode ST connector
-Isolation: 2 kV (I models)
-Pull high/low resistance for RS-485:150 kilo-ohms, 10 kilo-ohms, 4.7 kilo-ohms, 3.3 kilo-ohms, 1 kilo-ohm, 909 ohms, 822 ohms, 770 ohms, 500 ohms, 485 ohms
-RS-485 data direction control:ADDC (automatic data direction control)
-Terminator for RS-485: N/A, 120 Ohm, 120 Kilo-Ohm

Serial signals
RS-232:TxD, RxD, GND
RS-422:Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w:Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w:Data+, Data-, GND

Performance parameters
Input current: 300 mA at 12 to 48 VDC
Input voltage: 12 to 48 VDC
Number of current inputs: 1
Overload current protection: Supported
Connector:Terminal block
Power consumption:300 mA at 12 to 48 VDC

Physical characteristics
Housing:Metal
IP rating: IP30
Dimensions: 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 inches)
Weight: 330 g (0.73 pounds)
Installation: DIN rail mounting

Environmental limits
Operating temperature: 0 to 60 °C (32 to 140 °F)
Storage temperature (included): -40 to 85 °C (-40 to 185 °F)
Ambient relative humidity: 5 to 95 % (non-condensing)

Standards and certifications
-EMV: EN 55032/35
-EMI: CISPR 32, FCC Part 15B Class A
-EMS:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Overvoltage: power: 4 kV; signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; signal: 3 V/m
IEC 61000-4-8 PFMF

-Environmental tests
IEC 60068-2-1
IEC 60068-2-2
IEC 60068-2-3

-Safety: UL 61010-2-201
-Vibration: IEC 60068-2-6
-Hazardous locations: UL/cUL Class I Division 2 Groups A/B/C/D ATEX Zone 2

MTBF
Time: 792.085 hrs
Standards: Telcordia (Bellcore), GB