20 or more:
83,72 EUR
50 or more:
82,99 EUR
200 or more:
82,27 EUR
500 or more:
81,54 EUR
1000 or more:
80,81 EUR
2500 or more:
80,08 EUR
HEAE4512690 - Z-Temp3 Battery-operated thermostat 800 series (White RAL 9003)
Deliverytime: 3 - 5 working days (Mo-Fr) *
available: < 10
Key points at a glance:
Product Description
Heatit Z-Temp3is a battery-operated thermostat designed for use with water-based heating systems.
In combination with the Heatit Z-Water controller, you can control your heating system with a Z-Wave primary controller or gateway when using Heatit Z-Water in combination with one or more Heatit Z-Temp3. This is a 'wireless' solution that saves both time and money. All communication between the Heatit Z-Temp3 and the controlled device is 100% wireless.
It features SmartStart. Heatit Z-Temp could also be used in situations where a conventional electric thermostat is not suitable. The thermostat can be combined with the Heatit Z-Relay as an actuator installed at a remote location.
The Heatit Z-Temp3 is an excellent choice when restoring or remodelling existing buildings as it is easy to install without the need for wiring. We recommend using multiple 230V units to reinforce the mesh network.
Features:
- Z-Wave thermostat for controlling external relays
- Internal room sensor
- Humidity sensor
- SmartStart
- Firmware updates (OTA)
- 10 associations per group
- Lock mode/child lock
- S2 Security
- SmartStart
- Z-Wave 800 series
Technical data:
- Protocol: Z-Wave Plus V2
- Power supply: 2 x AAA batteries (1.5V)
- Ambient temperature: 5°C to 40°C
- Humidity: 10 - 85% R.H.
- Range: RF: 40 metres
- Hysteresis: 0.3°C to 3.0°C (default 0.5°C)
- IP code: IP 21
In combination with the Heatit Z-Water controller, you can control your heating system with a Z-Wave primary controller or gateway when using Heatit Z-Water in combination with one or more Heatit Z-Temp3. This is a 'wireless' solution that saves both time and money. All communication between the Heatit Z-Temp3 and the controlled device is 100% wireless.
It features SmartStart. Heatit Z-Temp could also be used in situations where a conventional electric thermostat is not suitable. The thermostat can be combined with the Heatit Z-Relay as an actuator installed at a remote location.
The Heatit Z-Temp3 is an excellent choice when restoring or remodelling existing buildings as it is easy to install without the need for wiring. We recommend using multiple 230V units to reinforce the mesh network.
Features:
- Z-Wave thermostat for controlling external relays
- Internal room sensor
- Humidity sensor
- SmartStart
- Firmware updates (OTA)
- 10 associations per group
- Lock mode/child lock
- S2 Security
- SmartStart
- Z-Wave 800 series
Technical data:
- Protocol: Z-Wave Plus V2
- Power supply: 2 x AAA batteries (1.5V)
- Ambient temperature: 5°C to 40°C
- Humidity: 10 - 85% R.H.
- Range: RF: 40 metres
- Hysteresis: 0.3°C to 3.0°C (default 0.5°C)
- IP code: IP 21
