DS50U7 - Barebone XPC slim Intel Core i7-10510U 2xSODIMM DDR4 2xM.2 1xSATA

Fanless 1.3 litre PC in industrial design with integrated ULV processor

The DS50U series are slim, fanless barebone PCs in a robust metal housing with universal connection options. The soldered Intel Gen12/13 ULV processor offers sufficient performance for the playback of 2160p/60 videos in 4K resolution. Two digital connections for UHD displays and a traditional VGA port are available. Components are easy to install: two DDR5 memory modules, a 2.5" drive and two M.2-2280 SSD cards can be accommodated behind the practical housing cover.

A 4G/5G module can also be optionally integrated into the second M.2 slot using the WWN04 adapter kit. Thanks to completely passive cooling, the system is practically maintenance-free, suitable for 24/7 continuous operation and also very economical. It is ideal for professional applications such as digital signage, POS, control, office or as a media PC.

Fanless and quiet
Passive cooling, no fan noise
Ideal for noise-sensitive environments
Less contamination from dust - therefore virtually maintenance-free

24/7 continuous operation
This device is officially approved for 24-hour continuous operation (24/7).
Requirements:
- Free air circulation in the area surrounding the PC
- Freely accessible ventilation holes on the device.
- If a hard drive is installed, the hard drive must be installed on the device. If a hard disk is installed, this must also be approved by the manufacturer for 24/7 operation.

Housing
Slim PC (nettop) with black steel housing
Without fan, complete with passive cooling
The installation slot for memory modules, 2.5" drive and M.2cards
are easily accessible behind two cover plates
Dimensions: 20 x 16.5 x 3.95 cm (LWH) = 1.3 litres
Weight: 1.6 kg net and 2.3 kg gross
Two openings for Kensington Lock and numerous
M3 threaded openings on both sides of the housing.

Operating position:
1) Vertical: The device is usually operated in an upright position using the supplied stand (DisplayPort connection facing upwards).
2) VESA mount: Use the supplied VESA mount to install the device behind a suitable monitor, for example.

Operating system
This barebone system is supplied without an operating system.
It is compatible with Windows 10/11 (64-bit) and Linux (64-bit).

Processor
Model: Intel Core i7-1355U
Codename: Raptor Lake-U (13. Generation Intel Core)
Performance cores (P-cores): 2 cores (4 threads), base/turbo clock: 1.7-5.0 GHz
Efficiency cores (E-cores): 8 cores (8 threads), base/turbo clock: 1.2-3.7 GHz
Smart cache (L3): 12 MB
Power dissipation (PL1 TDP): max. 15 W
Maximum junction temperature: 100 °C
System-on-a-chip architecture (SoC) with integrated memory and graphics controller
BGA1700 housing - soldered directly onto the mainboard
Manufacturing process: Intel 7 process (improved 10 nm process)

Integrated graphics
Intel UHD Graphics
Graphics clock frequency: max. 1300 MHz
Execution units (EUs): 96
Supports up to three independent displays
1) DisplayPort 1.4 supports Ultra HD @ 60 Hz
2) HDMI 2.0b supports Ultra HD @ 60 Hz
3) D-Sub/VGA supports analogue displays

Mainboard / BIOS
Proprietary mainboard especially for the DS50U series
Supports resume after power failure [2]
Supports Wake on LAN (WOL)
Supports power on by RTC alarm
Supports booting from M.2SSD cards and USB devices
AMI BIOS in 32 MByte EEPROM with SPI interface
Supports hardware monitoring and watchdog function
Supports the Unified Extensible Firmware Interface (UEFI)
Supports firmware TPM (fTPM) version 2.0

Power supply
External 90 W power supply (fanless)
Input: 100-240 V AC, 50/60 Hz, max. 1.6 A
Output: 19 V DC, max. 4.74 A, max. 90 W
Length of DC cable: approx. 170 cm
Length of AC mains cable: approx. 170 cm (3-pin with C6 cloverleaf and Schuko plug)

DC input
DC plug: 5.5 / 2.5 mm (outer/inner diameter)
The DC input of the computer supports a
external power supply with 12V±5% and 19V±5%.

Memory support
2x SO-DIMM slot with 262 pins
Supports DDR5-5200 (PC5-41600) SDRAM with 1,1 V
Also supports memory modules with a higher frequency specification
Supports dual-channel mode
Supports a maximum of 32 GB per slot
Total capacity maximum 64 GB
Supports unbuffered DIMM modules (no ECC or registered)
Two thermal pads for the RAM modules are included in the scope of delivery

2,5" drive bay with SATA connection
Supports one Serial ATA hard drive
or one SATA SSD drive in 6.35 cm / 2.5" format
Drive height max. 9.5 mm
Supports Serial ATA III, 6 Gb/s (600 MB/s) data transfer rate
Supports the Unified Extensible Firmware Interface (UEFI)
Note: A SATA cable is not required.

Two M.2-2280 slots for SSD cards
This product has two M.2-2280 Key-M slots
- M.2 cards with 22 mm width and 80 mm length are supported (type 2280)
- One M.2 SSD card with PCIe/NVMe interface is supported
- The second M.2 SSD card must have a SATA interface.SSD card must have a SATA interface
- the second slot can also be used for the optional WWN04 kit to install a 4G/5G network module.
The following configurations are supported:

M.2 slot for WLAN cards
Slot: M.2-2230 Type E
Interfaces: PCI-Express Gen. 3.0 X1 and USB 2.0
The M.2-2230 plug-in cards used must be 22 mm wide and 30 mm long (type 2230)
The device has two pre-installed antenna cables.
A WLAN expansion card in M.2-2230 format and two WLAN antennas are required for the WLAN function.format and two WLAN antennas are required.
Optional Shuttle accessory: WLN-M1

Sound function
Audio Realtek® ALC888S High-Definition Audio
Two analogue 3.5 mm audio connections on the front:
1) 2-channel line-out (headphones)
2) Microphone input
Digital multi-channel audio output via HDMI and DisplayPort

Dual network (2.5G + 1G)
Two RJ45 network connections
Network chips used:
1) left: Intel i219 Ethernet controller supports 1,000 / 100 / 10 MBit/s data transfer rate
2) right: Intel i226 Ethernet controller supports 2,500 / 1,000 / 100 MBit/s data transfer rate
Supports WAKE ON LAN (WOL)
Supports booting from the network via Preboot eXecution Environment (PXE)

Ports/buttons on the front
4x USB 3.2 Gen 1 (max. 5 Gbit/s, blue)
2x USB 3.2 Gen 2 (max. 10 Gbit/s, red)
Microphone input
Audio line-out (headphones)
On/off button
Power indicator LED (blue)
Hard drive LED (yellow)

Rear connections
DisplayPort 1.4 [3]
HDMI 2.0b
D-Sub/VGA
2x USB 2.0 (black)
2x Intel RJ45 network (left: 1 Gbit/s and right: 2.5 Gbit/s)
Serial COM port (5V / 12V, switchable: RS232 / RS422 / RS485) [1]
DC input for external power supply
Four-pin connector (2.54 mm pitch) for power button, Clear CMOS and 5 V DC [4]
2x connectors for external WLAN antennas

Always-on jumper
If jumper JP1 is removed (see quick guide), the PC will start unconditionally as soon as the power supply is established. [ 2]

Scope of delivery
Multilingual installation guide
Two metal feet with four M3 x 7 mm screws
VESA bracket for 75/100 mm standard (two metal brackets)
Four M3 x 7 mm screws (connects VESA bracket to PC)
Four M4 x 10 mm screws (connects VESA bracket to external mounting)
Two M3 x 5 mm screws for mounting a 2,5" drive
Two M3 x 5 mm screws for mounting M.2-cards
4x thermal pad for cooling optional components:
- 2x for M.2SSD card (approx. 70 x 20 x 4 mm)
- 2x for RAM module (approx. 50 x 15 x 2 mm and 60 x 20 x 1 mm)
Driver DVD for Windows
External 90W power supply unit with mains connection cable (with earthing contact)

Optional accessories
-PCP11:Adapter cable for a second COM port (replaces the VGA port)
- CXP01:Adapter cable for an external power button
- WLN-M1:WLAN module (supports WLAN/Bluetooth) with two external antennas and cables
- PRM01:2U rack panel for two Shuttle XPC slim
- DIR01:DIN rail mounting kit (for 35 mm DIN rails)
- WWN04:4G/5G kit with antennas - enables the use of an optional 4G/5G card in the M.2-format and a nano SIM card

Environmental parameters
Permissible operating temperature range: 0-40 °C [5]
Relative humidity, non-condensing: 10-90 %

Conformity and certificates
EMI: CE, FCC, BSMI, RCM, VCCI
Safety: CB, BSMI, cTUVus
Other: RoHS, Energy Star, ErP
This device is categorised as Class B information technology equipment (ITE) and is primarily intended for use in residential and office environments. The CE mark confirms conformity with the following EU directives:
(1) Directive 2014/30/EU on electromagnetic compatibility (EMC)
(2) Directive 2014/35/EU on the safety of electrical equipment (LVD)
(3) Directive 2009/125/EC on the ecodesign of energy-related products (ErP)

Notes:
[1] Jumper for COM port configuration:
Pin 9 of the two COM ports is a multifunctional connection. The mainboard jumper JP2 can be used to configure whether pin 9 is switched as a "Ring
Indicator" (RI) or provides an external power supply of
5 V or 12 V. Both COM ports can be configured individually.
The COM 1 connection can be set to either RS232, RS422 or RS485 in the BIOS setup.
The second COM port (COM 2) only supports RS232 mode. The connection is only available on the mainboard in the standard configuration of this product. To route this interface to the outside as a D-Sub connection, you need the appropriate adapter (e.g. the optional accessory PCP11) and you have to do without the VGA connection.

[2] Automatic switch-on after power failure:
In the BIOS setup under "Power Management Configuration" there is the function "Power-on after Power Fail", which defines how the PC reacts after a power failure. In principle, however, this function can fail in the event of very short power failures, meaning that this product also has a pure hardware solution. If jumper J9 is removed (see quick guide), the PC will start as soon as the power supply is restored.

[3]Convert DisplayPort to HDMI/DVI
The DisplayPort output can be converted to HDMI or DVI using an inexpensive, passive adapter cable. For example:
DELOCK 82590: 1m, DisplayPort (male, 20P) to HDMI-A (male, 19P)
DELOCK 82435: 5m, DisplayPort (male, 20P) to DVI-D (male., 24P)
The integrated graphics function recognises the characteristics of the connected display and outputs the appropriate electrical signal - either DisplayPort (without adapter) or HDMI/DVI (with adapter).
Conversely, a monitor with DisplayPort cannot be connected to the HDMI output via a simple, passive adapter.

[4] Four-pin connector on the rear
This enables the connection of an external power button.
In addition, a 5 V DC voltage is provided for external components and the CMOS memory can be cleared using a jumper (Clear CMOS). A suitable cable is available as optional accessory CXP01.

[5] Attention:For high ambient temperatures from 35 °C, it is recommended to use SSDs instead of hard disks.