P52U - Barebone XPC AIO Intel Celeron 5205U 39.62cm 15.6inch 2xSODIMM DDR4

XPC all-in-one P52U
15.6" all-in-one PC for POS, POI and kiosk applications

The Shuttle all-in-one PC product family now includes models in three screen sizes: 11.6", 15.6" and 19.5". The P52U model series with a capacitive 15.6" multi-touch screen offers Full HD resolution. An Intel Ultra-Low-Voltage (ULV) processor ensures high computing power with low power consumption. Thanks to completely passive cooling, the system is practically noiseless, maintenance-free and suitable for 24/7 continuous operation. Also ideal for applications in vertical markets is the arrangement of most of the connections on the underside of the housing and the resistance of the front against dust and splash water in accordance with protection class IP54.

Specifications

Fanless and quiet
- Passive heatpipe cooling, no fan noise
- Ideal for noise-sensitive environments
- Less contamination from dust - therefore virtually maintenance-free

24/7 continuous operation
This device is officially approved for 24-hour continuous operation (24/7).
Requirements:
- Free air circulation in the area surrounding the PC
- Freely accessible ventilation holes on the device.
- If a hard disk is installed, it must also be approved for 24/7 operation by the
manufacturer.

IP54 protection class
- The front of the device is protected against dust and splash water in accordance with protection class IP54.

Housing
- Colour: black
- Dimensions: 393.6 x 272.5 x 39.8 mm (WxHxD)
- 100 mm VESA mount
- Mounting hole for Kensington Lock
- Weight: 3.25 kg net, 4.5 kg gross

Operating system
- This system is supplied without an operating system.
It is compatible with:
- Windows 11 - 64-bit
- Windows 10 - 64-bit
- Linux - 64-bit

Touchscreen
- Screen with touch function for touch input with a finger
- Capacitive touchscreen with 10-point multi-touch support
- Supports operation with gloves made of PVC, cotton, linen - max. 0.4 mm thick
- Does not support stylus pen

39.6 cm display (15.6")
- 39.6 cm / 15.6" LC display, IPS technology
- Aspect ratio: 16:9 widescreen
- Physical resolution: 1920 x 1080 = 2 megapixels (Full-HD / 1080p)
- Brightness: 250 cd/sqm

Processor
- Model: Intel Celeron 5205U (ULV)
- System-on-a-chip architecture (SoC) - no chipset required
- FCBGA1528 package - soldered directly onto the mainboard
- Codename: Comet Lake-U (10th generation Intel Core) - Core: Intel Celeron 5205U (ULV) - Core: Comet Lake-U (10th generation Intel Core) Generation Intel Core)
- Cores / Threads: 2 / 2
- Clock speed: 1.9 GHz
- L1/L2/L3 cache: 256 kB / 1 MB / 2 MB
- Memory controller: DDR4-2400 Dual Channel (1.2 V)
- Power dissipation (TDP): max. 15 W
- Manufacturing process: 14 nm
- Maximum junction temperature: 100 °C
- Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX-Bit, AES-NI, SSE 4.1/4.2

Integrated graphics function
- Intel HD Graphics 610
- Graphics clock frequency: 300-900 MHz
- Execution units (EUs): 12
- Supports DirectX 12
- Supports H264, H265 8/10-bit, VP8/9, VC-1, AVC hardware decoding
- Supports Quick Sync Video and Clear Video HD technology

Up to three displays simultaneously
- Two video outputs support two additional independent monitors
1) HDMI 1.4b supports 1920 x 1080 @ 60 Hz or 3840 x 2160 @ 30 Hz
2) VGA / D-Sub analogue video supports 1920 x 1080 @ 60 Hz
- In multi-monitor mode, the following conditions apply:
- In clone mode, all displays show the same image in 1920 x 1080 resolution.
- In extended mode, all displays can show different content. In extended mode, all displays can show different content.

BIOS
- AMI BIOS in 16 MByte EEPROM with SPI interface
- Supports the function "Switch on after power failure" and "always on"
- Supports Wake-on-LAN (WOL) from the S3, S4, S5 ACPI modes
- Supports hardware monitoring and watchdog function
- Supports firmware TPM v2.0 function

Memory
- 2x SO-DIMM slot with 260 pins
- Supports DDR4-2400 (PC4-19200) SDRAM with 1.2 V
- Also compatible with DDR4-2666/3200 memory modules
- Supports dual-channel mode
- Supports a maximum of 32 GB per slot, Total capacity maximum 64 GB
- Supports unbuffered DIMM modules (no ECC or registered)

2.5" hard drive / SSD
- Supports one SATA hard drive or one SATA SSD drive in 6.35 cm / 2.5" format
- The SATA 3.0 interface supports up to 600 MB/s data rate (6 Gbit/s)
- Supports a drive with a height of up to 9.5 mm
- Pre-installed SATA cable available

M.2-2280-slot
- The M.2 2280 BM slot offers the following interfaces:
PCI-Express Gen. 2.0 x4
SATA v3.0 (max. 6 Gbit/s)
- The M.2 plug-in cards used must be 22 mm wide and 80 mm long.
- Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M-Key)

Cardreader
- Integrated card reader for reading and writing SD, SDHC and SDXC flash memory cards

Webcam
- Integrated Full HD camera module with 2.0 megapixel (1920 x 1080)

Microphone and speakers
- Condenser microphone and 2x 2 W speakers are integrated in the housing

Audio function
- C-Media CM6542 (USB) or Realtek ALC269 (HD audio)
- Two analogue 3.5 mm audio connections on the underside:
1) Line-out (headphones)
2) Microphone input
- Digital multi-channel audio output possible via HDMI.

Network
- Intel 219 Ethernet Controller
- Supports 10 / 100 / 1,000 MBit/s data transfer rate
- Supports WAKE ON LAN (WOL) from S3 and S4 mode
- Supports booting from the network via Preboot eXecution Environment (PXE)

M.2-Slot for WLAN
- M.2-2230E slot supports USB2.0, PCIe X1 and CNVi
- Suitable for commercially available WLAN modules in M.2 format
- Two internal WLAN antennas for 2.4/5 GHz are already pre-installed.
- Two 7 mm 7-mm antennas for 2.4/5 GHz are pre-installed. The housing has two 7 mm perforations for optional external antennas.

Front LEDs
- Power indicator (blue)
- Hard drive LED (orange)
- Battery LED (red) - reserved, no function

Connections on the left
- On/off button
- 2x USB 3.2 Gen. 1 (max. 5 Gb/s, blue)
- SD card reader
- Hole with Clear-CMOS button

Connections on the right
- Optional: 2x COM/serial (D-Sub, RS232)
- Opening for the Kensington Lock

Bottom connections
- HDMI 1.4b (supports digital video and digital audio)
- VGA connection (D-Sub 15-pin, analogue video)
- 2x USB 3.2 Gen. 1 ( max. 5 Gb/s, blue)
- 2x USB 2.0
- 2x COM/serial (D-Sub, RS232)
- Gigabit network (RJ45)
- Audio line-out / headphones (3.5 mm jack socket)
- Microphone input (3.5 mm jack socket)
- Input for external power supply unit (5.5 / 2.5 mm)
- 2x perforation for optional WLAN/LTE antennas (7 mm diameter)

Onboard connections
- Internal USB 2.0 type A connector for USB stick
- Serial ATA (6 Gbps) data/power supply combo connector
- 3x USB 2.0 connector (all occupied)
- Microphone connector (2-pin, occupied)
- Speaker connector (4-pin, occupied)
- eDP connector (Embedded DisplayPort) - occupied by the display
- LPC connector (occupied)
- I2C connector
- CMOS battery connector (2-pin, occupied)

Holes for optional antennas
- The housing has two perforated 7 mm holes
- For mounting optional antennas with (RP) SMA connection
- For wireless data transmission via WLAN or WWAN (e.g. LTE) Networke.g. LTE)

Power supply unit
- External 65 W power supply unit (fanless)
- Input: 100-240 V AC, 50/60 Hz, max. 1.6 A
- Output: 19 V DC, max. 3.42 A, max. 65 W

DC input
- DC plug: 5.5 / 2.5 mm (outer/inner diameter)
- The DC input of the computer supports a
- external power supply with 12V±5% and 19V±5%.

Included accessories
- Quick start guide
- Driver DVD
- 2x mounting plates for a 2.5" drive
- External power supply (65 W / 19V)
- Power supply cable (2-pin)
- Screws (2x for the M.2 slots, 8x for the 2.5" bay)

Optional accessories
- 1) COM port adapter PCP21 or 2x PCP11 for two additional serial COM ports on the right-hand side
- 2) M.2 WLAN module with two external antennas: WLN-M (802.11ac) or WLN-M1 (802.11ax)
- Two internal WLAN antennas are already pre-installed and can be used instead of the external antennas.

Permitted environmental parameters
- Operating temperature: 0-40 °C
- Humidity: 10-90 %

Certificates / Conformity
- EMI certificates: CE, UKCA, FCC, RCM, VCCI, BSMI
- Safety certificates: CB 60950/62368, cTUVus, BSMI
- Other conformities: RoHS, ErP Lot3, Energy Star
- This device is categorised as Class B information technology equipment (ITE) and is primarily intended for use in residential and office environments. The CE mark confirms conformity with the following EU directives:
(1) Directive 2014/30/EU on electromagnetic compatibility (EMC),
(2) Directive 2014/35/EU on the safety of electrical equipment (LVD),
(3) Directive 2009/125/EU on the ecodesign of energy-related products (ErP)