X50V9 BLACK - XPC AIO Barebone X50V9 39.62cm 15.6inch Intel Celeron 7305 2xSODIMM 64GB
XPC all-in-one X50V9
15.6" all-in-one PC for POS, POI and kiosk applications
The Shuttle XPC all-in-one X50V9 is the new model in Shuttle's successful X50 series and is equipped with a Gen12/13 Intel ULV processor. The modern processor architecture has a very positive effect on power consumption and computing performance. The existing WLAN function can be optionally supplemented with a 4G/5G function with up to 4 antennas. Thanks to passive heatpipe cooling, the system is virtually silent, maintenance-free and suitable for 24/7 continuous operation. Useful for applications in the vertical market is the arrangement of most connections on the underside of the housing and the resistance of the front against dust and splash water in accordance with protection class IP54.
- Intel Celeron 7305 processor
- Resistive 15.6" (39.6 cm) touchscreen (1366×768 px)
- Up to 64 GB DDR5 memory
- HDMI 2.0b and VGA for two external monitors
- Space for 2.5" drive and two M.2 SSDs
- Internal USB port for add-ons (dongle, 4G module)
- Gigabit Ethernet, Wi-Fi 5 (ac) and Bluetooth
- 6× USB external, 1× USB internal, COM ports (optional)
- Integrated speaker, camera and microphone
- Flexible stand and VESA mounting option
- Available in two colours
Flexible stand
The elegant yet stable stand can be infinitely adjusted to achieve the ideal viewing angle and an ergonomic operating position. It can also be used as a carrying handle.
Internal USB port
Licence dongles, 4G modems or any USB sticks can be plugged into an internal USB type A slot on this model. This protects them from theft and tampering.
Space for a 2.5" drive
In addition to an NVMe SSD, this model also provides a home for classic data storage devices in 2.5" format*. Hard drives and SSDs in this format offer many terabytes of storage space.
(*up to a height of 12.5 mm)
Two connections for external screens
Thanks to an HDMI 2.0b and VGA connection, the screen area of this model can be easily expanded. A total of three screens are available, e.g. for customer information and advertising content.
100% fanless
Thanks to energy-saving technology and a sophisticated cooling system, no fans are required. No operating noise, fewer moving parts and therefore lower maintenance costs.
How does it work?
Through a simple physical principle known as convection. Warm air rises upwards, while at the same time colder air is carried along. This permanent flow passes through machines or travels along surfaces. This prevents heat build-up and ensures reliable cooling.
Anti-theft protection
The Kensington security slot on the side of the enclosure (also known as the K-Slot or Kensington Lock) serves as an anti-theft device. Suitable security solutions in various designs are available from specialist retailers.
Integrated HD camera
A camera module with full HD resolution and microphone is located behind protective glass in the upper edge of the screen. It is suitable for scanning, object recognition or video telephony, for example.
-Fanless and quiet
Passive heatpipe cooling, no fan noise
Ideal for noise-sensitive environments
Less contamination from dust - therefore virtually maintenance-free
-24/7 continuous operation
This device is officially approved for 24-hour continuous operation (24/7).
Requirements:
- Free air circulation in the area surrounding the PC
- Freely accessible ventilation holes on the device.
- If a hard disk drive is installed, the hard disk drive must be installed. If a hard drive is installed, this must also be approved by the manufacturer for 24/7 operation.
-IP54 protection class
The front of the device is protected against dust and splash water in accordance with protection class IP54.
-Housing
Colour: Black or white
Dimensions: 39.1 x 32.7 x 4.2 cm (WxHxD)
100mm VESA mounting
Mounting hole for Kensington Lock
Weight: 3.5 kg net, 4.2 kg gross
-Operating system
This system is supplied without an operating system.
It is compatible with:
- Windows 10/11 - 64-bit
- Linux - 64-bit
-Touchscreen
Screen for touch input with a finger.
Resistive 5-wire technology for one-finger operation (single touch)
Included stylus for the touchscreen
-39.6cm display (15.6")
39.6 cm / 15.6" LC display, aspect ratio: 16:9 wide screen
Resolution: 1366 x 768 = 1.05 megapixels
Backlight: High-performance LED, brightness: 220 cd/sqm
Glass thickness: 3.2 mm
-Processor
Model: Intel Celeron 7305
Codename: Alder Lake-U (12th generation Intel Core). Generation Intel Core)
Performance cores (P-cores): 1 core (1 thread), clock speed: 1.1 GHz
Efficiency cores (E-cores): 4 cores (4 threads), clock speed: 0.9 GHz
Smart cache (L3): 8 MB
Power dissipation (PL1 TDP): max. 15 W
Maximum junction temperature: 100 °C
System-on-a-chip architecture (SoC) with integrated memory and graphics controller
BGA1700 housing - soldered directly onto the mainboard
Manufacturing process: Intel 7 process (improved 10 nm process)
-Integrated graphics
Intel UHD Graphics
Graphics clock frequency: max. 1100 MHz
Execution units (EUs): 48
-Up to three displays simultaneously
Two video outputs support two additional independent monitors
1) HDMI 2.0b digital audio/video output supports up to 3840 x 2160 pixel resolution at 60 Hz refresh rate (2160p60)
2) VGA / D-Sub analogue video output supports up to 1920 x 1080 pixel resolution at 60 Hz refresh rate (1080p60)
The following conditions apply in multi-monitor mode:
1) In clone mode, all displays show the same image in 1366x768 resolution
2) In extended mode, all displays can show different content
-BIOS
AMI BIOS in 32 MByte EEPROM with SPI interface
Supports the "switch on after power failure" and "always on" function
Supports Wake-on-LAN (WOL) from the S3, S4, S5 ACPI modes
Supports hardware monitoring and watchdog function
Supports firmware TPM v2.0 function
-Memory
2x SO-DIMM slot with 262 pins
Supports DDR5-4800 (PC5-38400) SDRAM with 1,1 V
Also supports DDR5 memory modules with higher frequency specification
Supports dual-channel mode
Supports a maximum of 32 GB per slot
Total capacity maximum 64 GB
Supports unbuffered DIMM modules (no ECC or registered)
Two thermal pads for the RAM modules are included in the scope of delivery
-Hard disk / SSD
Supports one SATA hard disk or one SATA SSD drive in 6,35 cm / 2.5" format
The SATA 3.0 interface supports up to 600 MB/s data rate (6 Gbit/s)
Supports a drive with a height of up to 9.5 mm
Pre-installed SATA cable with power supply available
- Two M.2-2280 slots for SSD cards -Two M.2-2280slots for SSD cardsSlots for SSD cards
This product has two M.2-2280 Key-M slots
- M.2 cards with 22 mm width and 80 mm length are supported (type 2280)
- One M.2 SSD card with PCIe/NVMe interface is supported
- The second M.2 SSD card must have a SATA interface.SSD card must have a SATA interface
- the second slot can also be used for the optional WWN04 kit to install a 4G/5G network module.
The following configurations are supported:
M.2 slot- Interface-Config 1-Config 2-Config 3
Slot 1CN6, top - PCIe Gen4 x4 and SATA 3.0 - M.2 SSD card (SATA) - M.2 SSD card (PCIe/NVMe) - M.2 SSD card (SATA)
Slot 2CN5, bottom - PCIe Gen4 x4 and USB 3.2 Gen2 *) - M.2SSD card (PCIe/NVMe) - optional WWN04 kit -
optional WWN04 kit
*) the USB 3.2 interface can only be used with the Shuttle WWN04 accessories
Two thermal pads for the M.2 SSDs are included in the scope of delivery (dimensions: 70 x 20 x 5.5 mm).
-Webcam
Integrated camera module with Full HD resolution (1920 x 1080)
-Microphone and speakers
Condenser microphone and 2x 2 W speakers are integrated in the housing
-Audio function
Realtek ALC888S (HD audio)
Two analogue 3.5 mm audio connectors on the underside:
1) Line-out (headphones)
2) Microphone input
Digital multi-channel audio output is possible via the HDMI.
-Network
Intel i219 Ethernet Controller
Supports 10 / 100 / 1.000 MBit/s data transfer rate
Supports WAKE ON LAN (WOL) from S3 and S4 mode
Supports booting from the network via Preboot eXecution Environment (PXE)
-Wireless network (WLAN)
WLAN controller card: Realtek RTL8821CE
WLAN antennas: two internal antennas
Supports WiFi IEEE 802.11b/g/n/ac in the 2.4 / 5 GHz band, 1T1R
Supports 20 / 40 / 80 MHz channel bandwidth
Security: supports WPA(-PSK), WPA2(-PSK), WEP 64/128 bit, IEEE 802.11x, IEEE 802.11i
Supports Bluetooth 4.2 in the 2.4 GHz band
The M.2-2230 Key A+E slot supports PCIe Gen3 x1, USB 2.0 and CNVi
-Front LEDs
Power indicator (blue)
Hard drive/SSD LED (orange)
-Connectors on the left
On/off button
2x USB 3.2 Gen 1 (max. 5 Gbit/s, blue)
Hole with concealed on/off button (onboard micro button)
Hole with concealed Clear CMOS button (onboard micro button)
- Bottom connections
HDMI 2.0b (supports digital video and digital audio)
VGA connection (D-Sub 15-pin, analogue video)
2x USB 3.2 Gen 2 (max. 10 Gbit/s, red)
2x USB 3.2 Gen 1 (max. 5 Gbit/s, blue)
Gigabit network (RJ45, Intel i219)
Audio line-out / headphones (3.5 mm jack socket)
Microphone input (3.5 mm jack socket)
Input for external power supply unit (5.5 / 2.5 mm)
Optional: 2x COM/serial D-Sub (1x RS232, 1x RS232/422/485)
-onboard connections
Internal USB 2.0 type A connection for USB stick
Serial ATA (6 GBit/s) cable for data and power supply
2x serial interfaces for optional COM ports (each 2x5-pin, 2 mm pitch)
Other available connections are occupied by integrated components.
-Holes for four optional antennas
The housing has four perforated 6.5 mm holes
for mounting optional antennas with (RP) SMA connection
for wireless data transmission via WLAN or WWAN (e.g. 4G/5G)
(see section "Optional accessories")
-Power supply unit
External 90 W power supply unit (fanless)
Input: 100-240 V AC, 50/60 Hz, max. 1.6 A
Output: 19 V DC, max. 4.74 A, max. 90 W
Length of DC cable: approx. 170 cm
Length of AC mains cable: approx. 170 cm (3-pin with C6 cloverleaf and Schuko plug)
-DC input
DC plug: 5.5 / 2.5 mm (outer/inner diameter)
The DC input of the computer supports a
external power supply with 12V±5% or 19V±5%.
-Accessories included:
Multilingual quick start guide
Driver DVD for Windows
External power supply unit (90W / 19V)
Power cable with earthing contact
2x thermal pad for SSD M.2 cards: 70 x 20 x 5.25 mm
2x thermal pad for RAM modules: 50 x 15 x 2.25 mm and 70 x 20 x 4 mm
3x M3x4 silver screws for mounting M.2SSD cards
4x screws M3x4 black for mounting a 2.5" SATA drive
-Optional accessories:
1) WLAN kit WLN-M1(Intel AX200 card + two external antennas)
An 802.11ac (1T1R) WLAN function with internal antennas is already pre-installed and can be upgraded to 802.11ax (2T2R) with two external antennas with this kit.
2) 4G/5G kit WWN04
This kit contains an adapter board for the lower M.2-2280 slot (CN5) and4G/5Gantennas.slot (CN5) and 4 external antennas.
These components are also required for data transmission in the mobile network:
- a 4G/LTE card in M.2-3042 format or a 5G card in M.2-3052 formatformat
- an activated nano SIM card
3) COM port adapter 2x PCP11
for two serial COM ports (1x RS232, 1x RS232/422/485) on the underside
-Permitted environmental parameters
Operating temperature: 0-40 °C
Humidity: 10-90 %, non-condensing
Certificates
EMI certificates: CE, UKCA, FCC, BSMI, RCM, VCCI
Safety certificates: CB (IEC 60950/62368), cTUVus (UL 62368), BSMI
Other conformities: RoHS, ErP Lot3, Energy Star v8.0
-Conformity
This device is categorised as Class B information technology equipment (ITE) and is primarily intended for use in residential and office environments. The CE mark confirms conformity with the following EU directives:
(1) Directive 2014/30/EU on electromagnetic compatibility (EMC),
(2) Directive 2014/35/EU on the safety of electrical equipment (LVD),
(3) Directive 2009/125/EC on the ecodesign of energy-related products (ErP) and
(4) Directive 2014/53/EU on radio equipment (RED: Radio Equipment Directive)
Manufacturer information
Shuttle Computer Handels GmbH
Fritz-Straßmann-Straße 5
25337 Elmshorn
DE - Deutschland
E-Mail: sales@shuttle.eu
Person responsible for the EU
Shuttle Computer Handels GmbH
Fritz-Straßmann-Straße 5
25337 Elmshorn
DE - Deutschland
E-Mail: sales@shuttle.eu