X50V8U3 WHITE - XPC all-in-one X50V8U3

The Shuttle XPC all-in-one X50V8U3 is the new model in Shuttle's successful X50 series and is equipped with a 10th generation Intel ULV processor "Comet Lake". The modern processor architecture has a very positive effect on power consumption and computing power. Thanks to completely passive cooling, the system is practically noiseless, maintenance-free and suitable for 24/7 continuous operation. Useful for applications in the vertical market is the arrangement of most of the connections on the underside of the housing and the resistance of the front against dust and splash water in accordance with protection class IP54.

-Fanless and quiet
Passive heat pipe cooling, no fan noise
Ideal for noise-sensitive environments
Less contamination from dust - therefore virtually maintenance-free
-24/7 continuous operation
This device is officially approved for 24-hour continuous operation (24/7).
Requirements:
- Free air circulation in the vicinity of the PC
- Freely accessible ventilation holes on the device.
- If a hard disk is installed, this must also be approved by the manufacturer for 24/7 operation.
-IP54 protection class
The front of the device is protected against dust and splash water in accordance with protection class IP54.
- HousingColour: black or whiteHousing
Colour: Black or white
Dimensions: 39.1 x 32.7 x 4.2 cm (WxHxD)
100mm VESA mounting
Mounting hole for Kensington Lock
Weight: 3.5 kg net, 4.2 kg gross
-Operating system
This system is supplied without an operating system.
It is compatible with:
- Windows 10/11 - 64-bit
- Linux - 64-bit
-Touchscreen
Screen for touch input with a finger.
Resistive 5-wire technology for one-finger operation (single touch)
Included stylus for the touchscreen
39.6cm display (15.6")
39.6 cm / 15.6" LC display, aspect ratio: 16:9 wide screen
Resolution: 1366 x 768 = 1.05 megapixels
Backlight: High-performance LED, brightness: 220 cd/sqm
Glass thickness: 0.5 mm
-Processor
Model: Intel Core i3-10110U (ULV)
System-on-a-chip architecture (SoC) with integrated memory and graphics controller
FCBGA1528 housing - soldered directly onto the mainboard
Codename: Comet-Lake-U (10th generation Intel Core) Cores: Comet-Lake-U (10th generation Intel Core). Generation Intel Core)
Cores / Threads: 2 / 4
Base clock rate: 2.1 GHz
Max. Turbo clock rate: 4.1 GHz
Intel Smart Cache: 4 MB
Power dissipation (TDP): max. 15 W
Manufacturing process: 14nm
Maximum junction temperature: 100 °C
Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX-bit, AES-NI, SSE 4.1/4.2
-Integrated graphics function
Intel® UHD graphics for 10th generation Intel® Core™ processors. Generation
Graphics clock frequency: 300-1000 MHz
Execution Units (EUs): 23
Supports DirectX 12, OpenGL 4.5
Supports H264, H265 8/10-bit, VP8/9, VC-1, AVC hardware decoding
Supports Quick Sync Video and Clear Video HD technology
-Up to three displays simultaneously
Two video outputs support two additional independent monitors
1) HDMI 1.4a supports 1920 x 1080 @ 60 Hz or 3840 x 2160 @ 30 Hz
2) VGA / D-Sub analogue video supports 1920 x 1080 @ 60 Hz
The following conditions apply in multi-monitor mode:
1) In clone mode, all displays show the same image in 1366x768 resolution
2) In extended mode, all displays can show different content
-BIOS
AMI BIOS in 8 MByte EEPROM with SPI interface
Supports the "switch on after power failure" and "always on" function
Supports Wake-on-LAN (WOL) from the S3, S4, S5 ACPI modes
Supports hardware monitoring and watchdog function
Supports firmware TPM v2.0 function
-Memory
2x SO-DIMM slot with 260 pins
Supports DDR4-2666 (PC4-21300) SDRAM with 1.2 V
Faster RAM modules (e.g. DDR4-3200) are backwards compatible and also run here at DDR4-2666 speed.
Supports dual-channel mode
Supports a maximum of 32 GB per slot, total capacity maximum 64 GB
Supports unbuffered DIMM modules (no ECC or registered)
-Hard disk / SSD
Supports one SATA hard disk or one SATA SSD drive in 6.35 cm / 2.5" format
The SATA 3.0 interface supports up to 600 MB/s data rate (6 Gbit/s)
Supports a drive with a height of up to 12.5 mm
Pre-installed SATA cable available
-M.2Slot for SSD cards
The M.2 2280 M-Key slot offers the following interfaces:
- PCI-Express Gen. 3.0 x4
- SATA v3.0 (max. 6 Gbit/s)
M.2 plug-in cards used must be 22 mm wide
and can have a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
Supports M.2 SATA SSDs (with B+M-Key) and M.2 PCIe SSDs (with M-Key)
-Cardreader
Integrated card reader for reading and writing
from SD, SDHC and SDXC flash memory cards
-Webcam
Integrated camera module with Full HD resolution (1920 x 1080)
-Microphone and speakers
Condenser microphone and 2x 2 W speakers are integrated in the housing
-Audio function
Realtek ALC269 (HD audio) or C-Media CM6542 (USB)
Two analogue 3.5 mm audio connections on the underside:
1) Line-out (headphones)
2) Microphone input
Digital multi-channel audio output via HDMI possible.
-Network
Intel i211 or i219LM Ethernet controller
Supports 10 / 100 / 1,000 MBit/s data transfer rate
Supports WAKE ON LAN (WOL) from S3 and S4 mode
Supports booting from the network via Preboot eXecution Environment (PXE)
-Wireless network (WLAN)
Built-in M.2-2230-E WLAN card with two internal antennas
WLAN controller Realtek RTL8821CE-CG
Supports WiFi IEEE 802.11b/g/n/ac in the 2.4 / 5 GHz band, 1T1R
Supports 20 / 40 / 80 MHz channel bandwidth
Security: supports WPA(-PSK), WPA2(-PSK), WEP 64/128 bit, IEEE 802.11x, IEEE 802.11i
Supports Bluetooth 4.2 in the 2.4 GHz band
-Front LEDs
Power indicator (blue)
Hard drive LED (orange)
-Connections on the left
On/off button
2x USB 3.2 Gen 1 (5 Gbit/s)
SD card reader
Hole with on/off button
Hole with Clear CMOS button
Perforation for optional WLAN/LTE antenna (6.5 mm diameter)
- Bottom connections
HDMI 1.4a (supports digital video and digital audio)
2x USB 3.2 Gen 1 (5 Gbit/s)
2x USB 2.0
Gigabit network (RJ45)
Audio line-out / headphones (3.5 mm jack socket)
Microphone input (3.5 mm jack socket)
Input for external power supply (5.5 / 2.5 mm)
Perforation for optional WLAN/LTE antenna (6.5 mm diameter)
Optional: 2x COM/serial (RJ45), DIO (RJ11) for cash drawer (POS01 accessory)
-Rear connections
VGA connection (D-Sub 15-pin., analogue video)
Optional: 2x COM/serial (D-Sub), 1x LPT/parallel (accessory: PCL71 or POS01)
- Connections onboard
Internal USB 2.0 type A connection for USB stick
Serial ATA (6 GBit/s)
Serial ATA power supply
3x USB 2.0 connection (all occupied)
eDP connection (Embedded DisplayPort) - occupied by the display
Connection for optional COM/LPT adapter POS01 or PCL71
-Holes for optional antennas
The housing has two perforated 6.5 mm holes
for mounting optional antennas with (RP-)SMA connection
for wireless data transmission via WLAN or WWAN (e.g. LTE) for wireless data transmission via WLAN or WWAN (e.g. LTE).e.g. LTE)
-Power supply unit
External 65 W power supply unit (fanless)
Input: 100-240 V AC, 50/60 Hz, max. 1.6 A
Output: 19 V DC, max. 3.42 A, max. 65 W
AC cable: 3-pin, approx. 1.7 m long, with C5/C6 cloverleaf plug connection to the power supply unit and CEE-7/7 plug with earthing contact (type E+F) for connection to the socket
DC input
DC plug: 5.5 / 2.5 mm (outer/inner diameter)
The DC input of the computer supports an
external power supply with 12V±5% or 19V±5%.
-Accessories included:
Quick start guide
Driver DVD for Windows
External power supply (65 W / 19V)
Power cable with earthing contact
Screws
-Optional accessories:
PCL71: COM / LPT adapter:
- 1x Parallel (25p D-Sub) supports 0 / 5 / 12V
- 2x Serial RS232 (9p D-Sub)
POS01: COM / LPT / RJ11 adapter:
- 1x Parallel (25p D-Sub)
- 2x Serial RS232 (9p D-Sub) supports 0 / 5 / 12V
- 2x Serial RS232 (8p RJ45)
- 1x DIO/RJ11 connection for cash drawer supports 12 / 24V
WLN-M1: WLAN kit (Intel AX200 card + two external antennas)
One WLAN function 802.11ac (1T1R) with internal antennas is already pre-installed and can be upgraded to 802.11ax (2T2R) with two external antennas with this kit.
-Permitted environmental parameters
Operating temperature: 0-40 °C
Humidity: 10-90 %, non-condensing
-Certificates
EMI certificates: CE, FCC, BSMI, RCM, VCCI
Safety certificates: CB, cTUVus, BSMI
Other conformities: RoHS, ErP Lot3, Energy Star v8.0
-Conformity
This device is categorised as Class B information technology equipment (ITE) and is primarily intended for use in residential and office environments. The CE mark confirms conformity with the following EU directives:
(1) Directive 2014/30/EU on electromagnetic compatibility (EMC),
(2) Directive 2014/35/EU on the safety of electrical equipment (LVD),
(3) Directive 2009/125/EC on the ecodesign of energy-related products (ErP) and
(4) Directive 2014/53/EU on radio equipment (RED: Radio Equipment Directive)