Banana Pi BPI-P2 pro（Armsom Pro） is a development board based on RK3308B-S chip. With a high-performance 4-core ARM Cortex-A35 processor, 512M RAM(16bit DDR2/DDR3/DDR3L/LPDDR2). and 8G eMMC onboard ,support PoE function.The chip has a wealth of interfaces, such as I2S,PCM,TDM, I2C,UART,SPDIF,HDMI ARC, etc., to meet the application of different products. RK3308 has a rich voice interface, its own eight ADC interface, multi-channel I2S and multi-channel PDM interface. This not only provides customers with a wealth of interface choices, but also can reduce the hardware design difficulty and hardware design cost of products.
Banana Pi BPI-P2 Pro has 512MB DDR3 memory size, operating system and storage can use SD card or emmc. BPI-P2 Pro is available as an onboard storage version with 1Gb/2Gb/4Gb/8Gb NAND flash

Application direction
– Maker DIY
– IoT Smart Internet of Things
– Intelligent speech recognition,
– Man-machine interface,
– Industrial control,
– Intelligent robot.

Key Features:
– CPU: 64bits Quad-core Arm Cortex-A35 Rockchip RK3308
– 512 DDR3 SDRAM
– 8G eMMC flash onboard
– WiFi (AP6256) & BT onboard
– 40 PIN GPIO,It includes UART, SPI, I2C, IO etc
– 100M LAN
– IEEE 802.3af PoE standard PoE module support

Banana Pi BPI-P2 pro
– SOC RockChip RK3308B-S
– CPU Quad-core ARM Cortex-A35
– GPU none
– ROM 512MB
– RAM 8GB eMMC
– TF Card TF card (Max 64GB)
– Network 100M LAN
– PoE power PoE function support，Output Voltage 5V, Output Power 10W
– WiFi AP6256
– Audio Output With built-in audio CODEC, including ADC×8 and DAC×2
– Power Source TYPE C 5V/2A or PoE power
– USB 1xUSB 2.0 1xType-C
– Others Fan、RTC、LED、debug
– Button Power Button、Reset Button、 Recovery Button、Root Button
– Low-level peripherals 40 Pin + 12 Pin
– uart GPIO(1×3) pin UART, ground
– LED Power led & Status led
– Product size 65mm X 52.5mm
– Weight 30g