802.11a/b/g/n access point, US band, -40 to 75°C operating temperature

WLAN interface
– WLAN standards: 802.11a/b/g/n; 802.11i Wireless security
– Modulation type: DSSS; OFDM; MIMO-OFDM
– Frequency band for US (20 MHz operating channels):
2.412 to 2.462 GHz (11 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)
5.500 to 5.700 GHz (8 channels) without 5.600 to 5,640 GHz
5,745 to 5,825 GHz (5 channels)
– Wireless security:
WEP encryption (64-bit and 128-bit)
WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
WPA/WPA2-Personal
– Transmission rate:
802.11b: 1 to 11 Mbps
802.11a/g: 6 to 54 Mbps
802.11n: 6.5 to 300 Mbps
– Transmission power for 802.11a:
23±1.5 dBm @ 6 to 24 Mbps
21±1.5 dBm @ 36 Mbps
20±1.5 dBm @ 48 Mbps
18±1.5 dBm @ 54 Mbps
– Transmission power for 802.11n (5 GHz):
23±1.5 dBm @ MCS0/8 20 MHz
18±1.5 dBm @ MCS7/15 20 MHz
23±1.5 dBm @ MCS0/8 40 MHz
17±1.5 dBm @ MCS7/15 40 MHz
– Transmission power for 802.11b:
26±1.5 dBm @ 1 Mbps
26±1.5 dBm @ 2 Mbps
26±1.5 dBm @ 5.5 Mbps
25±1.5 dBm @ 11 Mbps
– Transmission power for 802.11g:
23±1.5 dBm @ 6 to 24 Mbps
21±1.5 dBm @ 36 Mbps
19±1.5 dBm @ 48 Mbps
18±1.5 dBm @ 54 Mbps
– Transmission power for 802.11n (2.4 GHz):
23±1.5 dBm @ MCS0/8 20 MHz
18±1.5 dBm @ MCS7/15 20 MHz
23±1.5 dBm @ MCS0/8 40 MHz
17±1.5 dBm @ MCS7/15 40 MHz
– Receive sensitivity for 802.11a (measured at 5.680 GHz):
Typ. -90 @ 6 Mbps
Typ. -88 @ 9 Mbps
Typ. -88 @ 12 Mbps
Type. -85 @ 18 Mbps
Type. -81 @ 24 Mbps
Type. -78 @ 36 Mbps
Type. -74 @ 48 Mbps
Type. -72 @ 54 Mbps

Note: Due to a limitation in receiver sensitivity performance for channels 153 and 161, it is recommended not to use these channels in your critical applications.

– Receiver sensitivity for 802.11n (5 GHz; measured at 5.680 GHz):
Type. -69 dBm @ MCS7 20 MHz
Type. -71 dBm @ MCS15 20 MHz
Typ. -63 dBm @ MCS7 40 MHz
Type. -68 dBm @ MCS15 40 MHz

Note: Due to a limitation in receiver sensitivity performance for channels 153 and 161, it is recommended not to use these channels in your critical applications.

– Receiver sensitivity for 802.11b (measured at 2.437 GHz):
Type. -93 dBm @ 1 Mbps
Type. -93 dBm @ 2 Mbps
Type. -93 dBm @ 5.5 Mbps
Type. -88 dBm @ 11 Mbps
– Reception sensitivity for 802.11g (measured at 2.437 GHz):
Type. -88 dBm @ 6 Mbps
Type. -86 dBm @ 9 Mbps
Type. -85 dBm @ 12 Mbps
Type. -85 dBm @ 18 Mbps
Type. -85 dBm @ 24 Mbps
Type. -82 dBm @ 36 Mbps
Type. -78 dBm @ 48 Mbps
Type. -74 dBm @ 54 Mbps
– Reception sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz):
Type. -70 dBm @ MCS7 20 MHz
Typ. -69 dBm @ MCS15 20 MHz
Typ. -67 dBm @ MCS7 40 MHz
Type. -67 dBm @ MCS15 40 MHz
– WLAN operating mode: Access Point, Client, Sniffer
– Antenna: External, 2/2 dBi, omnidirectional
– Antenna connections: 2 RP-SMA sockets

Ethernet interface
– Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.1X for authentication
10/100/1000BaseT(X) ports (RJ45 connection): 1

Ethernet software functions
– Administration: DHCP server/client, DNS, HTTP, IPv4, LLDP, Proxy ARP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, VLAN, Wireless Search – Utility, MXview, MXview Wireless, MXconfig
– Security: HTTPS/SSL, RADIUS, SSH
– Time management: SNTP client

Firewall
– Filter: ICMP, MAC address, IP protocol, port-based

Serial interface
– Console connection: RS-232, 8-pin RJ45

LED interface
– LED indicators
– PWR, FAULT, STATE, SIGNAL, WLAN, LAN

Input/output interface
– Buttons: Reset button

Physical properties
– Housing: Metal
– IP protection class: IP30
– Dimensions: 58 x 115 x 70 mm (2.29 x 4.53 x 2.76 in)
– Weight: 307 g (0.68 lb)
– Mounting: DIN rail mounting, wall mounting (with optional kit)

Performance parameters
– Input current: 0.56 A @ 12 VDC, 0.14 A @ 48 VDC
– Input voltage: 12 to 48 VDC
– Power connection: 1 detachable 4-contact terminal block(s)
– Power consumption: 6.96 W (max.)
– Reverse polarity protection: Supports

Environmental conditions
– Operating temperature: -40 to 75°C (-40 to 167°F)
– Storage temperature (including packaging): -40 to 85°C (-40 to 185°F)
– Ambient relative humidity: 5 to 95% (non-condensing)

Standards and certifications
– EMC: EN 55032/24
– EMI: CISPR 32, FCC Part 15B Class A
– EMS:
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 3 V
IEC 61000-4-8 PFMF
– Radio: EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-WAPN008, MIC, NCC, RCM, SRRC, WPC, KC, ANATEL
– Safety: EN 60950-1, UL 60950-1
– Vibration: IEC 60068-2-6

MTBF
– Time: 749,476 hours
– Standards: Telcordia SR332