Entry-level managed Ethernet switch with 5 10/100BaseT(X) ports, -10°C to 60°C operating temperature

Ethernet interface
10/100BaseT(X) ports (RJ45 connector)
– 5
– Speed with automatic negotiation
– Full/half-duplex mode
– Automatic MDI/MDI-X connection
Standards
– IEEE 802.3 for 10BaseT
– IEEE 802.3u for 100BaseT(X) and 100BaseFX
– IEEE 802.3x for flow control
– IEEE 802.1D-2004 for Spanning Tree Protocol
– IEEE 802.1p for Class of Service
– IEEE 802.1Q for VLAN tagging
– IEEE 802.1w for Rapid Spanning Tree Protocol

Ethernet Software Features
Filter
– 802.1Q VLAN
– GMRP
– GVRP
– IGMP v1/v2
– Port-based VLAN
Industrial protocols
– EtherNet/IP
– Modbus TCP
Management
– Back Pressure Flow Control
– BOOTP
– DHCP Option 66/67/82
– DHCP Server/Client
– Flow Control
– IPv4/IPv6
– LLDP
– Port Mirror
– RARP
– RMON
– SMTP
– SNMP Inform
– SNMPv1/v2c/v3
– Syslog
– Telnet
– TFTP
MIB
– Bridge MIB
– Ethernet-like MIB
– MIB-II
– P-BRIDGE MIB
– RMON MIB Groups 1, 2, 3, 9
– RSTP MIB
Redundancy Protocols
– RSTP
– STP
– Turbo Chain
– Turbo Ring v1/v2
Time Management
– NTP Server/Client
– SNTP

Switch Properties
IGMP Groups
– 256
MAC Table Size
– 2 K
Max. No. VLANs
– 64
Packet Buffer Size
– 1 Mbits
Priority Queues
– 4
VLAN ID Range
– VID 1 to 4094

Serial Interface
Console Port
– RS-232 (TxD, RxD, GND), 10-pin RJ45 (115200, n, 8, 1)

DIPSwitchConfiguration
Ethernet Interface
– Turbo Ring, Master, coupler, reserve

Input/output interface
Alarm contact channels
– Relay output with a current carrying capacity of 1 A @ 24 VDC

Power parameters
Input voltage
– 12/24/48 VDC
– Redundant double inputs
Operating voltage
– 9.6 to 60 VDC
Input current
– 0.594 A @ 12 VDC
– 0.286 A @ 24 VDC
– 0.154 A @ 48 VDC
Overload current protection
– Supports
Reverse polarity protection
– Supports
Connection
– 1 detachable 6-contact terminal block(s)

Physical characteristics
Housing
– Metal
IP rating
– IP30
Dimensions
– 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Weight
– 650 g (1.44 lb)
Installation
– DIN rail mounting
– Wall mounting (with optional kit)

Ambient conditions
Operating temperature
– -10 to 60°C (14 to 140°F)
Storage temperature (including packaging)
– -40 to 85°C (-40 to 185°F)
Relative humidity
– 5 to 95% (non-condensing)

Standards and certifications
Safety
– UL 508
– UL 60950-1
– EN 62368-1
EMC
– EN 55032/35
EMI
– CISPR 32, FCC Part 15B Class A
EMS
– IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
– IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
– IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
– IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
– IEC 61000-4-6 CS: 10 V
– IEC 61000-4-8 PFMF
Hazardous areas
– ATEX
– Class I Division 2
Railway
– EN 50121-4
Traffic control
– NEMA TS2 Vibration NEMA TS2
Vibration
– IEC 60068-2-6
Shock
– IEC 60068-2-27
Free fall
– IEC 60068-2-31
Marine
– DNV
– LR

MTBF
Time
– 1,547.941 hours
Standards
– Telcordia (Bellcore), GB