Compact managed Ethernet switch system with 2 slots for 4-port Fast Ethernet interface modules, for a total of up to 8 ports, 0 to 60°C operating temperature

Input/Output Interface

Digital inputs
– +13 to +30 V for state 1
– -30 to +3 V for state 0
– Max. input current: 8 mA Alarm contact channels– Relay output with current-carrying capacity of 1 A @ 24 VDC Ethernet interface Module – 2 slots for any combination of 4-port interface modules – Max. input current: 8 mA Input current: 8 mA
Alarm contact channels
– Relay output with a current carrying capacity of 1 A @ 24 VDC

Ethernet interface

Module
– 2 slots for any combination of 4-port interface modules, 10/100BaseT(X) or 100BaseFX
Standards
– IEEE 802.1D-2004 for Spanning Tree Protocol
– IEEE 802.1p for Class of Service
– IEEE 802.1Q for VLAN Tagging
– IEEE 802.1s for Multiple Spanning Tree Protocol
– IEEE 802.1w for Rapid Spanning Tree Protocol
– IEEE 802.1X for Authentication
– IEEE 802.3 for 10BaseT
– IEEE 802.3ad for Port Trunk with LACP
– IEEE 802.3u for 100BaseT(X) and 100BaseFX
– IEEE 802.3x for flow control

Ethernet software functions

Filter
– GMRP
– GVRP
– IGMP v1/v2
– Port-based VLAN
Industrial protocols
– EtherNet/IP
– Modbus TCP
Management
– Back pressure flow control
– BOOTP
– DHCP Option 66/67/82
– DHCP Server/Client
– Flow Control
– IPv4/IPv6
– LLDP
– Port Mirror
– RARP
– RMON
– SMTP
– SNMP Inform
– SNMPv1/v2c/v3
– Syslog
– Telnet
– TFTP
MIB
– Bridge MIB
– Ethernet-like MIB
– MIB-II
– P-BRIDGE MIB
– Q-BRIDGE MIB
– RMON MIB groups 1, 2, 3, 9
– RSTP MIB
Redundancy protocols
– Link Aggregation
– MSTP
– RSTP
– STP
– Turbo Chain
– Turbo Ring v1/v2
Security
– Broadcast Storm Protection
– HTTPS/SSL
– Port Lock
– RADIUS
– SSH
– TACACS+
Time Management
– NTP Server/Client
– SNTP

Switch Properties

IGMP Groups
– 256
MAC Table Size
– 8 K
Max. No. VLANs
– 64
Packet Buffer Size
– 1 Mbits
Priority Queues
– 4
VLAN ID Range
– VID 1 to 4094

LED Interface

LED Indicators
– PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL

Serial interface

Console connection
– RS-232 (TxD, RxD, GND), 10-pin RJ45 (115200, n, 8, 1)

DIP switch configuration

Ethernet interface
– Turbo Ring, Master, Coupler, Reserve

Power parameters

Connection
– 1 removable 6-contact terminal block(s)
Input voltage
– 12/24/48 VDC
– Redundant double inputs
Input current
– 1.5 A @ 12 VDC
– Note: These are the input current values for the device with the maximum number of modules installed.
Power consumption (max.)
– 18 W @ 12 VDC
– Note: These are the power values for the device with the maximum number of modules installed.
Overload protection
– Supports
Reverse polarity protection
– Supports

Physical properties

IP protection class
– IP30
Dimensions
– 125 x 151 x 157.4 mm (4.92 x 5.95 x 6.20 in)
Weight
– 1,950 g (4.30 lb)
Installation
– DIN rail mounting
– Wall mounting (with optional kit)

Ambient conditions

Operating temperature
– 0 to 60°C (32 to 140°F)
Storage temperature (including packaging)
– -40 to 85°C (-40 to 185°F)
Relative humidity
– 5 to 95% (non-condensing)

Standards and certifications

Free fall
– IEC 60068-2-32
EMC
– EN 55032/35
– EN 61000-6-2/-6-4
EMI
– CISPR 32, FCC Part 15B Class A
EMS
– IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
– IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
– IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
– IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
– IEC 61000-4-6 CS: 10 V
– IEC 61000-4-8 PFMF
Hazardous areas
– ATEX
– Class I Division 2
Maritime
– ABS
– DNV
– LR
– NK
Railway
– EN 50121-4
Safety
– EN 62368-1
– UL 508
Shock
– IEC 60068-2-27
Traffic control
– NEMA TS2
Vibration
– IEC 60068-2-6

MTBF

Time
– 596,219 hours
Standards
– Telcordia (Bellcore), GB