Universal I/O, 4 AIs, 4 DIs, 4 DIOs, -40 to 75°C Operating temperature

Input/output interface
Digital input channels
– 4
Configurable DIO channels (by jumper)
– 4
Analogue input channels
– 4
Isolation
– 3k VDC or 2k Vrms
Buttons
– Reset button Reset button

Digital inputs
Connection
– Screwable Euroblock terminal
Sensor type
– Dry contact
– Wet contact (NPN or PNP)
I/O mode
– DI or event counter
Dry contact
– On: Short circuit to GND
– Off: open
Wet contact (DI to COM)
– On: 10 to 30 VDC
– Off: 0 to 3 VDC
Counter frequency
– 250 Hz
Digital filter time interval
– Software configurable
Points per COM
– 4 channels

Digital outputs
Connection
– Screw-type Euroblock terminal Screwable Euroblock terminal
I/O type
– Sink
I/O mode
– DO or pulse output
Nominal current
– 200 mA per channel
Pulse output frequency
– 500 Hz (max.))
Overcurrent protection
– 2.6 A per channel at 25°C
Overtemperature shutdown
– 175°C (typical), 150°C (min.))
Overvoltage protection
– 35 VDC

Analogue inputs
Connection
– Screwable Euroblock terminal
I/O mode
– Voltage/current
I/O type
– Differential
Resolution
– 16 bits
Input range
– 0 to 10 VDC
– 0 to 20 mA
– 4 to 20 mA
– 4 to 20 mA (with burn-out detection)
Accuracy
– ±0.1% FSR @ 25°C
– ±0.3% FSR @ -10 to 60°C
– ±0.5% FSR @ -40 to 75°C
Sampling rate
– 12 samples/sec. per module (shared by up to 4 channels)
Built-in resistor for current input
– 120 Ohm
Input impedance
– 10 Mega-Ohm (min.)

Ethernet interface
10/100BaseT(X) ports (RJ45 connector)
2, 1 MAC address (Ethernet bypass)
Magnetic isolation protection
1.5 kV (built-in)

Ethernet Software Features
Configuration Options
– Web Console (HTTP), Windows Utility (ioSearch), MCC Tool
Industrial Protocols
– Modbus TCP Server (Slave), Moxa AOPC (Active Tag), MXIO Library, EtherNet/IP Adapter
Management
– RESTful API, SNMPv1/v2c, SNMPv1 Trap, HTTP, DHCP Client, BOOTP, IPv4, TCP/IP, UDP
MIB
– Device settings MIB
Security
– Access control list

Security functions
Authentication
– Local database

LED interface
LED indicators
– Power, Ready, Port 1, Port 2

Modbus TCP
Supported functions
– 1, 2, 3, 4, 5, 6, 15, 16, 23
Mode
– Server (Slave)
Max. Max. number of client connections
– 10

EtherNet/IP

Mode
– Adapter
Max. number of scanner connections – 10 Max. number of scanner connections
– 9 (for read-only), 1 (for read/write)

Performance parameters
Power connection
– Screwable Euroblock terminal
Number of power inputs
– 1
Input voltage
– 12 to 36 VDC
Power consumption
– 139 mA @ 24 VDC

Physical properties
Housing
– Plastic
Dimensions
– 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Weight
– 200 g (0.44 lb)
Installation
– DIN rail mounting
– Wall mounting
Cabling
– I/O cable, 16 to 26 AWG
– Power cable, 12 to 24 AWG

Ambient conditions
Operating temperature
– -40 to 75°C (-40 to 167°F)
Storage temperature (in packaging)
– -40 to 85°C (-40 to 185°F)
Relative humidity
– 5 to 95% (non-condensing)
Altitude
– 4000 m

Standards and certifications
EMC
– EN 55032/24, EN 61000-6-2/-6-4
EMI
– CISPR 32, FCC Part 15B Class A
EMS
– IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
– IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
– IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
– IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
– IEC 61000-4-6 CS: 10 V
– IEC 61000-4-8 PFMF
Hazardous areas
– ATEX, Class I Division 2
Safety
– UL 508
Shock
– IEC 60068-2-27
Free fall
– IEC 60068-2-32
Vibration
– IEC 60068-2-6

Declaration
Environmentally friendly product
– RoHS, CRoHS, WEEE

MTBF
Time
– 502.210 hours
Standards
– Telcordia SR332