Ubiquiti U7-Pro, WiFi 7 AP for ceiling mounting

Mechanical
– Dimensions: Ø206 x 46 mm (Ø8.1 x 1.8″)
– Weight: 680 g (1.5 lb)
– Housing materials: Polycarbonate, metal
– Mounting hardware: Mounting bracket: Stainless steel (SUS304)
– Mounting plate: Galvanised steel (SGCC)

Hardware
– Network interface: (1) 1/2.5 GbE RJ45 port
– Management interface: Ethernet
– Power supply method: PoE+
– Power supply: UniFi PoE switch
– Supported voltage range: 44-57V DC
– Max. Power consumption: 21W
– Max. Transmit power: 2.4 GHz: 22 dBm, 5 GHz: 26 dBm, 6 GHz: 23 dBm
– MIMO: 2.4 GHz: 2×2, 5 GHz: 2×2, 6 GHz: 2×2
– Throughput rate: 2.4 GHz: 688 Mbps, 5 GHz: 2882 Mbps, 6 GHz: 5765 Mbps
– Antenna gain: 2.4 GHz: 4 dBi, 5 GHz: 6 dBi, 6 GHz: 5.8 dBi
– LEDs: White/blue
– Button: Factory reset
– Mounting: Wall/ceiling (included)
– Operating temperature: -30 to 60° C (-22 to 140° F)
– Operating humidity: 5 to 95% non-condensing
– Certifications: CE, FCC, IC

Software
– WiFi standards: 802.11a/b/g/n/ac/ax/be
– Wireless security: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3/PPSK)
– BSSID: 8 per radio
– VLAN: 802.1Q
– Advanced QoS: Per-user rate limiting
– Guest traffic isolation: Supported
– Concurrent clients: 300+

Supported data rates
– 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
– 802.11b: 1, 2, 5.5, 11 Mbps
– 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
– 802.11n: 6.5 Mbps to 300 Mbps (MCS0 – MCS15, HT 20/40)
– 802.11ac (WiFi 5): 6.5 Mbps to 1.7 Gbps (MCS0 – MCS9 NSS1/2, VHT 20/40/80/160)
– 802.11ax (WiFi 6): 7.3 Mbit/s to 2.4 Gbit/s (MCS0 – MCS11 NSS1/2, HE 20/40/80/160)
– 802.11be (WiFi 7): 7.3 Mbps to 5.7 Gbps (MCS0 – MCS13 NSS1/2, EHT 20/40/80/160/240/320)

Application Requirements
– UniFi Network: version 8.0.7 and higher
– UniFi OS: version 3.2 and higher