G3 Intercom – Indoor and outdoor intercom terminal for managing access requests for residential and commercial buildings with touch pass support.

Overview
– Dimensions: 324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 1.1″)
– Integrated camera: Yes
– NFC card and key fob access: Yes
– PIN access: Yes
– Touch Pass: Yes
– Mobile Unlock: Yes
– Two-Way Intercom & Doorbell Access: Yes
– Weatherproof: IP65

Mechanical
– Weight: Device: 965 g (2.1 lb); Bracket: 445 g (1 lb)
– Housing material: Aluminium alloy, UV-stabilised polycarbonate, glass
– Mounting material: Powder-coated stainless steel
– Mounting: Wall mount, adapter for gooseneck base (included); surface mount, flush mount, sunshade kit (optional)

Hardware
– Indoor and outdoor use: Yes
– Operating temperature: Device: -30 to 60° C (-22 to 140° F); Display: -25 to 60° C (-13 to 140° F)
– Operating humidity: 5 to 90 % non-condensing
– Network interface: (1) GbE RJ45 port
– Connectivity: BLE 4.2; NFC
– Power supply method: PoE; UL 294 Power-limited Class 2 PSU; UL 60950-1/62368-1 LPS/PS2 PSU
– Max. Power consumption: 13W
– Supported voltage range: 48V DC
– Sensors: Proximity sensor; ALS sensor
– Display: 177 mm (7″) diagonal
– Touchscreen technology: Capacitive multi-touch
– Display brightness: Max. 1000 nits (typical)
– Screen orientation: Portrait
– Resolution: 1024 x 600 px
– Microphone: Yes
– Speaker: Yes
– NFC frequency: 13.56 MHz
– NFC read range: < 30 mm (1.18”)
– NFC technology: ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340); MIFARE Classic / MIFARE DESFIRE; Sony FeliCa™ (ID only); NFC Forum Tags T1T, T2T, T3T, T4T and T5T; ECP 2.0
– LEDs: Amber colour Learn more
– Buttons: (1) Factory reset
– PoE cabling requirements: Cat 5e cabling is recommended as the minimum power category. The power category used should match the transmission speed required at the installation site. The minimum allowable conductor size for the connection between the PSE or Power Injector and the PD is 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cables.
– UL 294 Level: Destructive Attack: Level I: Line Safety: Level I; Durability: Level I; Standby Power: Level I
– UL 294 Explanation: Compliance with IEEE 802.3 specifications has not been verified under UL 294. The device shall comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
– CAN/ULC-60839-11-1 Class: Classification: I
– Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
– NDAA compliant: Yes
– Document number and issue date and/or revision level: UA-G3-Intercom, V01

Software
– Management application: Access
– Software information: The software version can be checked at https://unifi.ui.com.