Compact, robust and operator-activated LTE Cat 4 mobile WiFi router for indoor and outdoor IoT applications.

– Site-to-site VPN and VPN client routing
– (2) GbE ports with (1) PoE output*
– Power supply via PoE, USB Type-C or 4-pin DC socket
– GPS positioning in outdoor areas
– Flexible wall, pole and DIN rail mounting
– Weatherproof (outdoors) with the supplied cover
– Optional Mobility Cloud subscription**

*PoE+ input required for PoE passthrough.

Mechanical
– Dimensions
Without antennas and external cover: 114.5 x 93.6 x 32 mm (4.5 x 3.7 x 1.3″)
With antennas: 213 x 93.6 x 32 mm (83 x 3.7 x 1.3″)
With antennas and outer cover: 217 x 94 x 32 mm (8.5 x 3.7 x 1.3″)
– Weight
Device: 360 g (12.7 oz)
Device with outer cover: 395 g (13.9 oz)
DIN rail/wall mount: 25 g (0.9 oz)
– Housing material
Polycarbonate, aluminium
– Mounting material
Wall/mast mounting: Polycarbonate
DIN rail mounting: Polycarbonate
– Pole mounting diameter
1-2″ on outer tube diameter
– Wind load
38.8 N at 200 km/h (8.7 lbf at 125 mph)
– Weather protection
Device with external cover: IP66

Hardware
– Management interface
Ethernet
WiFi
– Network interface
(2) GbE RJ45 ports
LTE category 4 radio
WiFi 4
– PoE interface
(1) PoE input
(1) PoE output* (Max. 10W)
*Requires a PoE+ switch.
– Power supply Power supply
UniFi PoE switch (48-54V DC)
USB Type-C (5V DC)
4-pin* ATX DC socket (9-30V DC)
*Pin 1 for Power + and pin 2 for Ground -. Detailed information on the pin assignment of the power socket can be found in the installation manual.
– Power consumption
12.5 W
– SIM
nano-SIM (4FF)
– LTE bands
B1, B3, B7, B8, B20, B28
– 3G bands
B1, B8
– LTE throughput speed*
Download 150 Mbps / Upload 50 Mbps
*The speed depends on the network coverage and performance at the device location.
– WiFi standards
802.11 b/g/n, WiFi 2.4G, 20/40 MHz
– Max. WiFi transmission power
22 dBm
– WiFi MIMO
2 x 2
– GPS
Yes
– Antenna SMA connectors
(1) Mobile 1: SMA socket, supports 1Tx and 1Rx
(1) Mobile 2: SMA socket, supports 1Rx only
(1) GPS: SMA socket
(2) WiFi: RP-SMA jacks
Note: Ensure that all SMA/RP-SMA connectors are secured with antennas or the caps provided to ensure weatherproofing.
– External antennas
(2) Mobile/LTE antennas with SMA connectors
(1) GPS antenna with SMA connectors
(2) WiFi antennas with RP-SMA connectors
– LED
Status: blue/white
– Button
Factory reset
– Mounting
DIN rail/wall/rod mounting (included)
– Operating temperature
-40 to 70° C
– Humidity
5 to 95% non-condensing
– Certifications
CE, GCF, Wi-Fi Alliance®

Supported WiFi data rates
– 802.11b
1, 2, 5.5, 11 Mbps
– 802.11g
6, 9, 12, 18, 24, 36, 48, 54 Mbps
– 802.11n (WiFi 4)
6.5 Mbps to 300 Mbps (MCS0 – MCS7, HT 20/40)