FreePBX Ready System – APU2E5, 4 GB RAM, 16 GB mSATA SSD, 19″ rack housing

FreePBX is a web-based open source GUI (graphical user interface) that controls and manages Asterisk (PBX), an open source communications server. FreePBX is licensed under the GNU General Public License (GPL), an open source licence. FreePBX can be installed manually or as part of the pre-configured FreePBX Distro, which includes the operating system, Asterisk, FreePBX GUI and various dependencies.

Some of the features that FreePBX supports by default are:

• Unlimited voice mailboxes
• “Follow Me” function
• Call groups with call confirmation
• Unlimited number of conferences (limited by available CPU power)
• Paging and intercom function for SIP phones that support it
• Music on hold (via MP3s or streamed from the Internet)
• Call queues
• And many more

The FreePBX software runs on an energy-saving APU2E5 system, so power consumption is a maximum of 10 watts. The system is fanless, passively cooled and extremely small.

• APU2E update: The size of the battery socket has been changed to avoid contact problems. Added signal integrity resistor for core voltage control signal

Scope of delivery:

• 1x 19″ DualRack enclosure with single-slot front panel
• 1x APU2E5 board
• 1x 16 GB mSATA SSD with pre-installed FreePBX software
• 1x power supply unit (12 V, 3 A)
• 1x power cable set incl. power cable and suitable connection cable for connecting the board to the power supply unit
• 1x network cable (1 m)

• CPU: AMD Embedded G Series GX-412TC, 1 GHz Quad Jaguar Core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2 MB L2 cache
• DRAM: 4 GB DDR3-1333 DRAM
• Storage: boot from mSATA-SSD, SD card (internal sdhci controller) or external via USB, 1x SATA + power connector
• 12 V DC, around 6 to 12 W depending on CPU load, built-in socket = 2.5 mm, positive inner conductor
• Connectivity: 3 Gigabit Ethernet channels (Intel i211AT)
• I/O: serial DB9 interface, 2x USB 3.0 external + 2x USB 2.0 internal, 3x LEDs on the front, push-buttons
• Extension: 2x miniPCI-express (1x with SIM connector), LPC bus, GPIO header, I2C bus, COM2 (3.3 V RXD/TXD)
• Board size: 6 x 6″ (152.4 x 152.4 mm) – like apu1d, alix2d13 and wrap1e
• Firmware: Coreboot
• Cooling: Conductive cooling from CPU to case with 3 mm thick aluminium heatspreader (included)