UDB-PRO-EU - Device bridge Pro

5 GHz wireless bridge with PoE output that establishes connections over 5+ km distance or enables seamless uplinks to UniFi WiFi.

Mechanical
- Dimensions Ø189.5 x 64.3 mm (Ø7.4 x 2.5")
- Weight Without mount: 431 g (1 lb)
- With mount: 515 g (1.1 lb)
- Housing material: UV-resistant polycarbonate
- Bracket material: UV-stabilised polycarbonate, stainless steel
- Pole mount diameter: 20-53.1 mm (0.8-2.1") depending on outer tube diameter
- Wind load: 69 N at 200 km/h (15.5 lbf at 125 mph)
- Weather resistance IPX6

Hardware
- Network interface (2) GbE RJ45 ports
- Management interface
- Ethernet
- WiFi
- PoE interface
(1) PoE input (PoE output not used)
(1) Passive PoE output
- Power supply method PoE, PoE+ (required for PoE output)
- Power supply UniFi PoE switch, 48V, 0.32A PoE adapter (included)
- Supported voltage range 42.5-57V DC
- Max. Power consumption 9W
- Max. Transmission power
2.4 GHz -
5 GHz 25 dBm
6 GHz -
- Max. Data rate
2.4 GHz -
5 GHz 867 Mbps (BW80)
6 GHz -
- MIMO
2.4 GHz -
5 GHz 2 x 2
6 GHz -
- Antenna gain
2.4 GHz -
5 GHz 19 dBi
6 GHz -
- Antenna Internal
- Range 5+ km
- LEDs Power, Ethernet, (4) Signal strength
- Factory reset button
- Mounting stand (included)
- Operating temperature -40 to 60° C (-40 to 140° F)
- Humidity 5 to 95% non-condensing
- Certifications CE, FCC, IC

Software
- WiFi Standards 802.11a/n/ac
- Wireless security WPA2 AES (Always On)
- Operating frequency* US/CA
U-NII-1 5150 - 5250 MHz
U-NII-2A 5250 - 5350 MHz
U-NII-2C 5470 - 5725 MHz
U-NII-3 5725 - 5850 MHz
- Worldwide
5150 - 5875 MHz
*Depending on the region.
- Channel bandwidth Channel bandwidth 20/40/80 MHz
- Max. conducted transmission power 25 dBm (combined)
- Modulation BPSK (½), QPSK (½), QPSK (¾), 16QAM (½), 16QAM (¾), 64QAM (2⁄3), 64QAM (¾), 64QAM (5⁄6), 256QAM (¾), 256QAM (5⁄6)