Die kompakten, lüfterlosen Industriecomputer auf Arm-Basis von Moxa sind drahtlos einsatzbereit und verfügen über umfassende Sicherheitsfunktionen. Sie sind für platzkritische Anwendungen konzipiert. Die Computer sind speziell für den Langzeitbetrieb konzipiert und verfügen 10 Jahre Support für Moxa Industrial Linux, was sie zur idealen Wahl für Fernüberwachungs- und Datenerfassungsanwendungen macht.

Kompakter, RISC-basierter Embedded-Computer mit 1-GHz-Prozessor, 2 seriellen Anschlüssen, 2 Ethernet-Anschlüssen (1 Gigabit-Ethernet), microSD-Steckplatz und -40 bis 75 °C Betriebstemperatur

Computer
– CPU Armv7 Cortex-A8 1 GHz
– DRAM 512 MB DDR3
– Storage Pre-installed 8 GB eMMC
– Supported OS Moxa Industrial Linux 1 (Debian 9, kernel 4.4), 2027 EOL
– Storage Slot Micro SD slots x 1

Computer Interface
– Ethernet Ports
Auto-sensing 10/100 Mbps ports (RJ45 connector) x 1
Auto-sensing 10/100/1000 Mbps ports (RJ45 connector) x 1
– Serial Ports RS-232/422/485 ports x 2, software selectable (DB9 male)
– Console Port RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1)
– Buttons
Reset button
DIP switch for serial port configuration

Ethernet Interface
– Magnetic Isolation Protection 1.5 kV (built-in)

Serial Interface
– Baudrate 50 bps to 921.6 kbps
– Data Bits 5, 6, 7, 8
– Stop Bits 1, 1.5, 2
– Parity None, Even, Odd, Space, Mark
– Flow Control
RTS/CTS, XON/XOFF
ADDC (automatic data direction control) for RS-485
RTS Toggle (RS-232 only)
– Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms
– ESD Protection 4 kV, for all signals

Serial Signals
– RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
– RS-422 Tx+, Tx-, Rx+, Rx-, GND
– RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
– RS-485-2w Data+, Data-, GND

LED Indicators
– System Power x 1
– LAN
2 per port (10/100 Mbps)
2 per port (10/100/1000 Mbps)
– Serial 2 per port (Tx, Rx)
– User Programmable User x 1

Physical Characteristics
– Dimensions (with ears) 99 x 111 x 25.5 mm (3.90 x 4.37 x 1.00 in)
– Dimensions (without ears) 77 x 111 x 25.5 mm (3.03 x 4.37 x 1.00 in)
– Weight 290 g (0.64 lb)
– Housing Metal
– Installation
Wall mounting
DIN-rail mounting (with optional kit)

Environmental Limits
– Operating Temperature -40 to 75°C (-40 to 167°F)
– Storage Temperature -40 to 85°C (-40 to 185°F)
– Ambient Relative Humidity 5 to 95% (non-condensing)
– Shock IEC 60068-2-27
– Vibration 2 Grms @ IEC 60068-2-64, random wave, 5-500 Hz, 1 hr per axis (without USB devices attached)

Power Parameters
– Input Voltage 9 to 48 VDC
– Input Current 0.45 A @ 9 VDC, 0.084 A @ 48 VDC
– Power Consumption 4 W

MTBF
– Time 982,882 hrs
– Standards Telcordia (Bellcore) Standard TR/SR

Reliability
– Alert Tools External RTC (real-time clock)
– Automatic Reboot Trigger External WDT (watchdog timer)

Standards and Certifications
– EMC EN 55032/35
– EMI CISPR 32, FCC Part 15B Class A
– EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: Power: 0.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 3 V
IEC 61000-4-8 PFMF
– Safety
IEC 60950-1
UL 60950-1
– Hazardous Locations
Class I Division 2
ATEX Zone 2
– Green Product RoHS, CRoHS, WEEE